Search results

Selling a set of 4 285/75-16r bfg km2s that are at half tread. No plugs, worn evenly. Mounted on stock 00 factory alcoas painted black. Rather not seperate or ship. $600 obo Located around Flint Michigan

I have a used PI converter for sale. Has around 20k miles on it since Brian at BTS went through it. Truck was never pulled/raced or towed, just daily driven at sub 300hp. Came out of a running & driving truck, nothing wrong with it just have no use for it. Asking $600 obo

I have a set of 275/200 hybrids for sale. Have about 20k on em, freshly flowed by Unlimited & given a clean bill of health. Could use a set of O rings but other then that they are ready to drop in. Not sure what the used market is on hybrids right now but figured I'd ask $1750 OBO. They ran...

Selling my 97 F350 4x4, don't want to but need to down size. Need something a little more practical for a daily driver & have another 7.3L for hauling/towing. Truck has 198k miles with an 01 engine out of a Ford E350 van with 119k miles. Swapped the engine in a couple weeks ago. -3" down pipe...

Have a stock 2wd 4R100 from an 01 E350 van for sale. Van had 118k miles on it when pulled, fluid was red. Asking $350 OBO

Can we get a CDL section for all the Big Rig & Medium duty guys? Maybe start off as heavy/med duty in one section & if it ever grew big enough split em into their own sections.

Who else has em? The more I look at this thing (now that the tranny is out) the more I want to slap a set of hockey pucks under the body mounts to help it clear just a hair. I really don't see how much I can smash the firewall without having to dog house the inside & pull the up pipe off to get...

After much thought I've decided to sell "Da Bus". Nothing wrong with it really, just time to move onto something new. A lot of you know what I've done to it but here is a current updated list. 97 F350 CCLB 4x4 4.10 gears 187k miles The good- - replaced seals/axle shaft U joints/ball joints in...

I know it will bolt in but don't know if it needs a solenoid pack swaped. Anyone have any input on this?

Figured I'd start this thread because I know I'm not the only one that feels that one tune can handle 99% of what we're doing with our trucks. I have a TS 6pos with 1 tune burned on it currently just to fill up the other 5 slots. The pedal is left alone so I can drive it in rain/snow/ice without...

Listing these for a buddy, he has a set of 6 Ford dually rims off an 05+ truck. The bolt pattern is 8x200mm so they won't bolt onto a 99-04 as those are 8x170mm. This includes 6 rims, 4 alloys & 2 steel inners. For questions or more pics call/text Leo at 810-656-1688 Located near Imlay...

Okay haven't seen a thread yet so figured I'd start one, for all the caltrac users out there that might be having issues getting their setup dialed in 100%. For the guys that can launch/burnout without hopping, how much preload do you have, what shocks are you running & what tires are you using?

Figured since we had a good valve spring thread going it would only be fair to start one on push rods. So what is everyone running for pushrods in their aftermarket higher hp applications? I know a lot of people running smith bros but, I also know of a few that run stockers.

Haven't seen a thread lately & talk seems to be scattered. So lets try to get some people to offer up some input on what that use/d for valve springs. I've seen stock, 910s, shimmed 910s, beehives, ext... Post up your setups & what you run/ran & how it worked.

I have seen it done but wanted to know what everyone who did the old school junk glass XL light to 05 light did for a conversion plug? I know you can buy a 9007 to 9008 adapter plug but don't see anything for the glass to 9008 adapters. Cut & splicing isn't a big deal, I have everything needed...

Okay I know it can be done on a 99-03 7.3L SD. I've done it before & know plenty others that have as well. But looking at my firewall I don't quite know if can be done even with rocking the engine on an OBS. I remember Jim Rosewood cut the firewall on his drag truck. Just wondering if anyone had...

I decided to do a writeup on how to swap the shifter arm on our trucks because, I haven't seen a good one & people ask me this question alot. It really isn't hard if you take your time & is a good thing to know incase your OD off button quits working. In my case it didn't work for close to 2...

Superduty Codes F350 duallys 61 - open - 3.73 62 - open - 4.10 63 - open - 4.30 F1 - Limited slip - 3.73 F2 - Limited slip - 4.10 F3 - Limited slip - 4.30 F350 SRW 41 - open - 3.73 42 - open - 4.10 43 - open - 4.30 D1 - L/S - 3.73 D2 - L/S - 4.10 D3 - L/S - 4.30 F250 & Excursion 31 -...

Needs to be a sticky- This covers all OBS 1/2 ton to F450s Open Diff 12 - 3800/1723 - 2.73 18 - 3800/1723 - 3.08 19 - 3800/1723 - 3.55 25 - 5300/2403 - 4.10 29 - 5300/2403 - 3.55 35 - 6250/2834 - 4.10 39 - 6250/2834 - 3.55 45 - 7400/3356 - 4.10 49 - 7400/3356 - 3.55 65 - 8250/3741 - 4.10 69 -...

Well the Rebel Cat is officially here. I see everyone else is already making themself's at home this morning.