madpowerstroke
New member
Hello, guys and gals
I have been very busy getting the company up to speed( reducing waiting times) and other things I'm getting finished up ( better quality products).
Anyhow I just received some new wheels for a turbo that I have been developing. The turbo will be called the Madmax, it is my version of a Powermax. I designed the compressor wheel myself with some tweaks, from the manufacture. The wheel is exclusive to me, measurement, 66mm/90mm there about with extended tips.
I have only built one and sent it out for testing before I committed to a full order. Well initial testing is going well, so I have decided to get more wheels for more testing. So what about the help? I'm looking for members that have a Powermax right now and are running 175-190 injectors. The turbo I developed was target at those size injectors, so if someone wants to I will upgrade their Powermax for the Madmax for cost. Remember that no has a tune so you would have get with a tuner to get it tuned in.
Right now the turbo is being run with a stock turbo tune, and full fuel 190/100, runs pretty good on that but could use some fine tuning to get the most out of it. The turbo once all testing comes back and is all good will go into production. The turbo will be a brand new turbo, and no core charge, pricing will be somewhere 1850.00-1900.00 so far unless some tweaking needs to happen then might be just a little higher. The compressor wheel is a hi tech wheel, and great quality so it is costing me more then my other wheels.
PM me if you are interested and meet with the wants. I can also mod a 68mm if needed to the new turbo. I will also place back to original Powermax if not happy with results. Only looking for a few on this deal so let me know. Thanks
I have been very busy getting the company up to speed( reducing waiting times) and other things I'm getting finished up ( better quality products).
Anyhow I just received some new wheels for a turbo that I have been developing. The turbo will be called the Madmax, it is my version of a Powermax. I designed the compressor wheel myself with some tweaks, from the manufacture. The wheel is exclusive to me, measurement, 66mm/90mm there about with extended tips.
I have only built one and sent it out for testing before I committed to a full order. Well initial testing is going well, so I have decided to get more wheels for more testing. So what about the help? I'm looking for members that have a Powermax right now and are running 175-190 injectors. The turbo I developed was target at those size injectors, so if someone wants to I will upgrade their Powermax for the Madmax for cost. Remember that no has a tune so you would have get with a tuner to get it tuned in.
Right now the turbo is being run with a stock turbo tune, and full fuel 190/100, runs pretty good on that but could use some fine tuning to get the most out of it. The turbo once all testing comes back and is all good will go into production. The turbo will be a brand new turbo, and no core charge, pricing will be somewhere 1850.00-1900.00 so far unless some tweaking needs to happen then might be just a little higher. The compressor wheel is a hi tech wheel, and great quality so it is costing me more then my other wheels.
PM me if you are interested and meet with the wants. I can also mod a 68mm if needed to the new turbo. I will also place back to original Powermax if not happy with results. Only looking for a few on this deal so let me know. Thanks