I installed a second superduty fuel pump on my dads 02 F350 and I added a fuel filter and a water seperator during the install. This truck is running on w85 and I wanted to put this stuff on before I put any in it. I figured having the second pump should relieve some strain off the single pump to keep pressure up. I bought most all the parts I needed from Jegs but realized I needed a couple more so I picked those up from a local supply house. Here is what I started out with.
This filter head is for the water seperator, it is from fleetfilter.com and uses a wix 33405 water seperator.
This filter head is from Cim-tek and uses the same fuel filter as a Fass fuel pump. That is why I ended up using these two filter heads. I run a fass pump on my truck and didnt want to have 4 different types of filters to use.
I needed to make a couple brackets to mount the filter heads to. I was going to mount them to the frame but they would have been too low because of the e-brake cable so I had some scrap aluminum laying around and used that.
This filter head is for the water seperator, it is from fleetfilter.com and uses a wix 33405 water seperator.
This filter head is from Cim-tek and uses the same fuel filter as a Fass fuel pump. That is why I ended up using these two filter heads. I run a fass pump on my truck and didnt want to have 4 different types of filters to use.
I needed to make a couple brackets to mount the filter heads to. I was going to mount them to the frame but they would have been too low because of the e-brake cable so I had some scrap aluminum laying around and used that.