Wheel/Tire Tech Thread

powerstrokin15 · Jul 2, 2013

awesome. thanks all

Sent while charging my POS iPhone 5 battery

Crownsville Stroker 7.3 · Jul 3, 2013

WydOpen said:
Very minor rubbing with my '10. I don't know what the fender well clearance difference is between the 05-07 and 08-10.

My 2010 with 6" lift, 22x11's, and 37x13.50-22 Toyos...

Damn that thing looks good

Sent from on the commode with Tapatalk 2

WydOpen · Jul 3, 2013

Crownsville Stroker 7.3 said:
Damn that thing looks good

Sent from on the commode with Tapatalk 2

Thanks! :toast: Best truck I've owned to date, and I've owned a lot.

83f350 · Aug 11, 2013

I was wondering if on a 2000 f350 would 37x13.50's rub on a 6in lift? im running 20x10 rims with a -24 offset. any help is appreciated

BigBluediesel08 · Aug 17, 2013

What would be the perfect tire size for a 22x12? Would like 35s, but not sure if they make a 13.5 for a 22in wheel. Don't want/like the stretched tire look.

HOOV3R · Aug 17, 2013

BigBluediesel08 said:
What would be the perfect tire size for a 22x12? Would like 35s, but not sure if they make a 13.5 for a 22in wheel. Don't want/like the stretched tire look.

325/50 is a 34.4 x 13

BigBluediesel08 · Aug 17, 2013

HOOV3R said:
325/50 is a 34.4 x 13

Perfect! Thanks bud!

HOOV3R · Aug 17, 2013

BigBluediesel08 said:
Perfect! Thanks bud!

Here's another pic

BigBluediesel08 · Aug 17, 2013

HOOV3R said:
Here's another pic

Nice! Thanks again. So the tire doesn't look stretched at all? Sorry, can't really tell, but your truck looks nice!

HOOV3R · Aug 17, 2013

BigBluediesel08 said:
Nice! Thanks again. So the tire doesn't look stretched at all? Sorry, can't really tell, but your truck looks nice!

Nope

BigBluediesel08 · Aug 17, 2013

HOOV3R said:
Nope

Awesome man!! Looks perfect. Thanks for the pics!

Pikesnogle · Aug 20, 2013

Alright, my eyes hurt from looking and searching for an answer to my question.

I am trying to find out if I could run 305/60/18 Pro Comp Xtreme AT's on my STOCK height 2006 4x4. It looks like the stock rim will be ok as far as width but I am concerned about rubbing.

Any info would be appreciated.

Sorry if I re-posted.

-Alex

ltlbsteed · Aug 20, 2013

Hey all... great thread with tons of info! I've read this entire thread and haven't quite found an answer for my question: I'm taking delivery on a '13 cc 4x4 F250 w/ FX4 tomorrow and the first thing I need to do is get some wheels and tires... What I really want to do is put 22" rims on the truck with 2 1/2 inches or so sticking out the side - just not sure what rim width, offset, backspacing I would need and what tire size would fit - I really like to fill out the wells as much as possible and can handle minor trimming. I am planning on a 2.5" leveling kit too... Any input??

Jeff@Spartan · Aug 21, 2013

22x10's with a 35" tire should work with minor trimming on a truck with a 2.5" leveling kit.

hagan525 · Aug 21, 2013

Alright kmc xd riots with +18 offset wrapped in 37x12.50R20 on a 2011 f250 with a 5.5" rough country lift? I had 37x14.50R20 but the tires hit the radius arms so will the 12.50 fit?

Lift kit was supposed to be. 4.5" but they sent me 6" springs and a add-a-leaf

ltlbsteed · Aug 22, 2013

SPARTAN said:
22x10's with a 35" tire should work with minor trimming on a truck with a 2.5" leveling kit.

Thanks Jeff, that's what I was hoping would work. What offset and backspace would I be looking for to get 2 1/2 or so out the side?

20007.3stroker · Aug 22, 2013

Looking for a little advice on this exact topic!!! Right now Im running 285/75/16, well Ive been on a look out for 16.5 rims so I can run humvee tires(trying to save a few bucks on tires). Finally found some locally that have the super duty bolt pattern. The military tires are 37/12.5/16.5. Im trying to figure out what if anything I would need to do to fit them. Heres a pic of how my truck is sitting currently.

Twisted Excursion · Aug 23, 2013

6 inches with trimming or 8 inches of lift. also depends on how wide of rim and offset you get as well.

RollnCoal · Sep 2, 2013

Hello, I know it's an old post but I'm wondering how everything worked out with your 20x12" and 35x12.5x20" tires on your truck with the 2.5 leveling kit? I wanna go with the same set up but I'm getting mixed feedback on the possibility of it working or not. Some say its darn close, others say its not possible. I seen you bought the rims so I was wondering if it worked out good for you and if so, how much trimming if any was involved? Thank you!