Black 02
New member
I have lots of 7.3L parts I'm selling.
7.3L Block. Recently hot tanked, magnafluxed, line honed and bored 0.040 over at a reputable machine shop. Comes with a polished crank. Ready for assembly for an engine build. Block also has a partial fill in the water jackets to help stiffen the bottom end for a higher horsepower build. Fill is below the bottom of the freeze plugs. $1000 obo.
DP Tuner F-6 chip with the round gauge switcher. Fits nicely in a gauge pod. Has tunes for a 2002 Super Duty with an automatic and the tunes were for a 7.3L with 350/200 injectors. New with the tunes, this was over $700. I'll sell for $500 obo. Make me an offer.
7.3L Crank - Would work as a core or it'll need to be turned due to a ****ty build causing the rod to beat on it for a bit. $150 obo
7.3L Heads - I have two pairs of heads. They have been stripped and hot tanked. I'm not aware if they need machine work or not. I have the valves, springs and retainers for at least one pair of heads. Make offer.
7.3L Super Duty Fuel Bowl - Recently rebuilt fuel bowl with RiffRaff FRX fuel crossover system. The FRX is $200 new. I'll sell it for $200 with the fuel bowl.
7.3L Rods and Pistons - I have a used set of 7.3L forged rods with stock pistons and a used set of 7.3L PMR rods and stock pistons. Make an offer.
7.3L camshaft and gear - Cam with welded gear and lifters. $200 obo
7.3L intake plenums - Factory plenums from a super duty $75 obo
Lots of other stuff. Old Super Duty turbo, intercooler pipes, rocker arms, push rods, ehaust manifolds, etc etc. Just ask. Make me an offer on anything. Just too much stuff sitting around that I don't need anymore. A lot came from having to do my engine build twice. No other reason I have it.
All of the prices are before shipping. If you're in my area, we can work on delivery or shipping. If I'm too high on my prices, make me an offer. I need to make room in my shop and don't need this stuff.
I can upload pictures if anyone wants to see anything.
7.3L Block. Recently hot tanked, magnafluxed, line honed and bored 0.040 over at a reputable machine shop. Comes with a polished crank. Ready for assembly for an engine build. Block also has a partial fill in the water jackets to help stiffen the bottom end for a higher horsepower build. Fill is below the bottom of the freeze plugs. $1000 obo.
DP Tuner F-6 chip with the round gauge switcher. Fits nicely in a gauge pod. Has tunes for a 2002 Super Duty with an automatic and the tunes were for a 7.3L with 350/200 injectors. New with the tunes, this was over $700. I'll sell for $500 obo. Make me an offer.
7.3L Crank - Would work as a core or it'll need to be turned due to a ****ty build causing the rod to beat on it for a bit. $150 obo
7.3L Heads - I have two pairs of heads. They have been stripped and hot tanked. I'm not aware if they need machine work or not. I have the valves, springs and retainers for at least one pair of heads. Make offer.
7.3L Super Duty Fuel Bowl - Recently rebuilt fuel bowl with RiffRaff FRX fuel crossover system. The FRX is $200 new. I'll sell it for $200 with the fuel bowl.
7.3L Rods and Pistons - I have a used set of 7.3L forged rods with stock pistons and a used set of 7.3L PMR rods and stock pistons. Make an offer.
7.3L camshaft and gear - Cam with welded gear and lifters. $200 obo
7.3L intake plenums - Factory plenums from a super duty $75 obo
Lots of other stuff. Old Super Duty turbo, intercooler pipes, rocker arms, push rods, ehaust manifolds, etc etc. Just ask. Make me an offer on anything. Just too much stuff sitting around that I don't need anymore. A lot came from having to do my engine build twice. No other reason I have it.
All of the prices are before shipping. If you're in my area, we can work on delivery or shipping. If I'm too high on my prices, make me an offer. I need to make room in my shop and don't need this stuff.
I can upload pictures if anyone wants to see anything.