hello all,
been a lurker here for awhile, but can't seem to find some answers to problem i'm currently having with my 2006 6.0 Powerstroke.
Mods: CAI, Straight 5" exhaust, 190/30 Warren Injectors, Barder Stage 2, Bored .020", Flycut and delipped pistons, Stage 2 Elite Diesel Cam, Upgraded Valve Springs, ARP Studs, O-Ringed UCF Heads, AirDog 150, WPE Regulated Return and Ported Intake Manifold. Custom Warren Tunes on SCT SF3. 4.5" Icon lift with 18x10 Fuel Throttles Wrapped in 37x12.5R18 Nitto Trail Grapplers.
Issues: Rough Idle(feel it shaking the truck) and no power when in gear/no acceleration no matter what pedal position. When in gear and holding brake it'll actually stall.
What I've Tried: replacement Injectors (was getting contribution code on cylinder 5 - swapped with cylinder 1 code moved to cylinder 1. got replacement injector still get cylinder 5 contribution code) when turning motor over it is very smooth and consistent so don't really think its a base motor issue. Tried swapping new FICM - No Change. Even got a working PCM from a totaled Truck - No Change. Went Through Engine harness, no abrasion anywhere, in good shape.
This is a plea for help... all thoughts and ideas are appreciated.
Sent from my SM-N920V using Tapatalk
been a lurker here for awhile, but can't seem to find some answers to problem i'm currently having with my 2006 6.0 Powerstroke.
Mods: CAI, Straight 5" exhaust, 190/30 Warren Injectors, Barder Stage 2, Bored .020", Flycut and delipped pistons, Stage 2 Elite Diesel Cam, Upgraded Valve Springs, ARP Studs, O-Ringed UCF Heads, AirDog 150, WPE Regulated Return and Ported Intake Manifold. Custom Warren Tunes on SCT SF3. 4.5" Icon lift with 18x10 Fuel Throttles Wrapped in 37x12.5R18 Nitto Trail Grapplers.
Issues: Rough Idle(feel it shaking the truck) and no power when in gear/no acceleration no matter what pedal position. When in gear and holding brake it'll actually stall.
What I've Tried: replacement Injectors (was getting contribution code on cylinder 5 - swapped with cylinder 1 code moved to cylinder 1. got replacement injector still get cylinder 5 contribution code) when turning motor over it is very smooth and consistent so don't really think its a base motor issue. Tried swapping new FICM - No Change. Even got a working PCM from a totaled Truck - No Change. Went Through Engine harness, no abrasion anywhere, in good shape.
This is a plea for help... all thoughts and ideas are appreciated.
Sent from my SM-N920V using Tapatalk