Search results

  1. hucorey

    7.3 Pusher Intake

    Keep your factory intake. Aftermarket ones don't add any more power. Only time it's worth buying one is if you have an e99 and want to switch to the late 99-03 turbo setup. Sent from my Pixel 4 XL using Tapatalk
  2. hucorey

    7.3 Ported and Polished heads

    Rohnert Park Machine. Sent from my Pixel 4 XL using Tapatalk
  3. hucorey

    7.3 Ported and Polished heads

    The clapped out poppet valves/seats can be fixed. These were indeed hand ported. I have been happy with the SRP. The back o-ring is very very slightly leaking, but its nothing Im concerned about. Yes, swirl was indeed left in tact. The guy who flow bench tested them has been doing...
  4. hucorey

    7.3 Ported and Polished heads

    I figured I'd fill anyone interested in on a big project I've been working on and have finally got these custom ported and polished 7.3L heads over to a friend's to have them flowed. Using a Superflow SF300 flow bench set at 28"w.c., with a stock cam profile intake lift, these showed a 44cfm...
  5. hucorey

    Ported heads.

    This would be true as long as the person doing the port n polish job didn't screw them up. Sent from my Pixel XL using Tapatalk
  6. hucorey

    160/30 injectors real world reviews

    I wonder if this is a difference between EDM vs extrude hone nozzles??? Sent from my Pixel XL using Tapatalk
  7. hucorey

    2019 Single Cab Build thread

    I would also say a "build" is also at least a cab off, new heads, or engine out and rebuild. I would say something like this would be more fitting to go in the "What did you do to your Powerstroke today" thread. Sent from my Pixel XL using Tapatalk
  8. hucorey

    FFD Rail System

    Nope, we seen the 300-400 psi pressure difference between the two heads with the check valves out. I didn't realize other shops made these, but back when I was working at the steel mill, the engineers would always call out crossover piping on the big hydraulic pumps with dual outlets to...
  9. hucorey

    Go to E4OD transmission shop?

    I just don't understand why some people turn to being shady. Doing good/honest work always pays out best in the long run. Sent from my Pixel XL using Tapatalk
  10. hucorey

    FFD Rail System

    These rails seem go against the science of fluid power. I wish I saw this thread much earlier. Testing that has been done for our crossover line (anyone's really) we seen as high as 300-400psi difference between the two heads with an analog gauge on each head. With an hpx line, pressures were...
  11. hucorey

    Go to E4OD transmission shop?

    Dorsey is a crook. Lots of his dealers have dropped him the last few months because of customers paying for a built trans only to find out they got band-aid transmissions. I know of 4 shops off the top of my head that dropped him. His brother used to work for him and he spilled the beans on...
  12. hucorey

    CNC fuel bowl ******

    What he said^^^^ But I designed that ****** block as a retro-fit for those who bought the line kit with the intent of keeping their fuel bowl, but then got tired of the bowl leaking later on. Sent from my Pixel XL using Tapatalk
  13. hucorey

    Mechanically Injected 7.3 Trucks Info/Pictures

    It's only money. Lol Sent from my Pixel XL using Tapatalk
  14. hucorey

    Mechanically Injected 7.3 Trucks Info/Pictures

    Thanks. When you are dealing with mechanical fuel injection, your lines all HAVE to be the same length or you will end up dropping a cylinder due to fueling issues. That smaller center hub is for basically infinite timing adjustments. We like the cleaner look of the valve cover risers, and if...
  15. hucorey

    Mechanically Injected 7.3 Trucks Info/Pictures

    Next weekend is the plan to do the first full heat cycle on this one, and then hit the dyno to dial it in. We didnt build the bottom end to handle 2000hp as its just a plate girdle, so we need to dial it down to around 1200hp or less for this season.
  16. hucorey

    Mechanically Injected 7.3 Trucks Info/Pictures

    Here's the truck I sponsor with our conversion kit. It was at UCC this past weekend for those that made it. It's turned down quite a bit as it only has our plate girdle kit instead of our bed plate. Sent from my Pixel XL using Tapatalk
  17. hucorey

    What have you done to your powerstroke today?

    Replaced a sticky RR caliper, new WeatherTech floor mats, and cleaned the interior on the 6.0 a couple days ago, and changed the oil and wiper blades on my 7.3 yesterday. Sent from my Pixel XL using Tapatalk
  18. hucorey

    Iso 38r turbo

    Just email the shop as that's the most reliable way to get an answer back from me. [email protected] Sent from my Pixel XL using Tapatalk
  19. hucorey

    Iso 38r turbo

    Thanks. When I accidentally do, it's because PSA and all other forums I'm on look exactly the same on the Tapatalk mobile app. Only way to see is at the very top in the "breadcrumbs" you'll see the forum name. Sent from my Pixel XL using Tapatalk
  20. hucorey

    6.7 starter in a 7.3

    Exactly. Many people fail to research the kw output of all the starters. Cleaning the connections once in a while, newer battery cables, and good batteries will keep a 7.3 cranking over fast. Sent from my Pixel XL using Tapatalk

Random media

triples2
2008 6.4L pic7
image180
03 7.3 ZF6
'07 5.9 Cummins
2008 6.4L pic9
99.5 7.3
Picture_1206
step_8
elbow_1
avatar7453_1
2011-10-29_10-39-17_621-1

Latest posts

Members online

Total: 284 (members: 4, guests: 280)
Top