Search results
-
OBS 05+ axle swap
Except you share an email address and IP address with thatdude......- Hotrodtractor
- Post #121
- Forum: 94-97 Aftermarket
-
Billet stealth hpop leaking
With all these unrepairable billet stealth pumps... someone should just send one to me. lol- Hotrodtractor
- Post #25
- Forum: 7.3 Aftermarket
-
dry sump HPOP
I would dedicate an entire section to feed the HPOP. When at full tilt with a hot set of sticks you are going to need a lot of flow. Just shooting from the hip here at the moment - when I was doing the math I figured I needed about 12GPM for a hot setup just for the HPO system at 3K RPMs at the...- Hotrodtractor
- Post #20
- Forum: 7.3 Aftermarket
-
dry sump HPOP
Not a new idea. Very doable - the problem you will find is that you need to add an oil pump to the stack that just feeds your HPOP - and the oil flow requirements are quite high if you are in the area that actually benefits from the money being spent on a dry sump setup. I have some notes...- Hotrodtractor
- Post #6
- Forum: 7.3 Aftermarket
-
anybody still running a srp1.1?
With a few measurements of the springs, knowing installed and working heights, and measuring spring rates - a suitable replacement should be relatively easy. I would also assume that they are setup in such a way that the springs are fatiguing and breaking.... so unless its a very ****ty...- Hotrodtractor
- Post #37
- Forum: 7.3 Aftermarket
-
B Codes, Not a Noob post
0Hp. I haven't installed these sticks into anything. Many have asked. None have been granted components. That doesn't mean that all of the work has been for naught. Many things have found there way into the injectors of mere mortals because of the work conducted in conjunction with the shops I...- Hotrodtractor
- Post #156
- Forum: 7.3 Aftermarket
-
B Codes, Not a Noob post
Without getting all into the technical details of electromagnet design - yes - I have more wraps with larger wire utilizing a balance of increased wire (less resistance) and longer wire (more wraps, and more resistance) to come out with a design that is very close to factory resistance (and...- Hotrodtractor
- Post #153
- Forum: 7.3 Aftermarket
-
B Codes, Not a Noob post
You most certainly need to increase spring strength to decrease poppet float at higher ICP. But that doesn't necessarily mean you need a stronger solenoid to operate it. On the initial testing we simply cranked up the base ICP to a point where it would fire. In much the same way that higher ICP...- Hotrodtractor
- Post #151
- Forum: 7.3 Aftermarket
-
B Codes, Not a Noob post
Solenoids have nothing to do with holding ICP pressures. In fact I have tested very high pressures on a bench using stock solenoids. The tolerances.... lol.... lets just say it is the closest slip fit you have ever seen. If you hold the plunger in your hand for a moment it will no longer fit...- Hotrodtractor
- Post #124
- Forum: 7.3 Aftermarket
-
B Codes, Not a Noob post
I can't seem to locate any of my pictures of my custom solenoids.... if someone wants to dig I posted a couple of pictures somewhere (maybe PSN) several years ago.- Hotrodtractor
- Post #121
- Forum: 7.3 Aftermarket
-
TS Burner Pro Software Issue
I've had it working on another copy of Windows 7 on a different laptop before.... but it died so I was trying to make it work on my work laptop to get by. Failed miserably. If I get some time I'm going to go back and try it again, but my trusty Windows XP machine saved the day. lol- Hotrodtractor
- Post #7
- Forum: 7.3 Aftermarket
-
B Codes, Not a Noob post
It was just a lot of math based upon real world data and a few educated engineering assumptions. The real problem with the heui system and massive fuel quantities comes down to two things: the volume of oil needed per cc of fuel injected, and the pressure drop of the oil as it flows across the...- Hotrodtractor
- Post #39
- Forum: 7.3 Aftermarket
-
B Codes, Not a Noob post
They sit on the shelf in a box right now. Waiting on me to finish the truck they are to go into..... work has severely gotten in the way..... Preliminary bench testing showed some awesome results.... if the truck runs half as well as the numbers show I'll be ecstatic.- Hotrodtractor
- Post #31
- Forum: 7.3 Aftermarket
-
TS Burner Pro Software Issue
I thought that was likely the case.... except when that has happened to me in the past it usually errors out with a "missing component blah blah blah" that you can readily search for download and be all good. I just went through and installed the software on my desktop running my CNC software...- Hotrodtractor
- Post #5
- Forum: 7.3 Aftermarket
-
TS Burner Pro Software Issue
That's not really all that useful to solve my issue at hand. I know there are much newer and better options now..... that doesn't change the fact that I still have a small handful brand new blank TS Chips that I purchased years ago in bulk to get better pricing when I was doing performance work...- Hotrodtractor
- Post #3
- Forum: 7.3 Aftermarket
-
TS Burner Pro Software Issue
My old laptop died..... I'm in need of burning a chip for a guy so I slapped the software on my work laptop with Windows 7 (just like my old laptop). I get nothing but error messages saying "No Hardware Found" Doesn't matter what my COM settings are, what USB port I am trying, how many or how...- Hotrodtractor
- Thread
- Replies: 7
- Forum: 7.3 Aftermarket
-
B Codes, Not a Noob post
I never kept the dyno sheets from when old red spun the rollers... she hated dynoing - the first dyno she wouldn't spool.... did like 480rwhp on about 10 lbs of boost if I recall correctly (hey it was almost 10 years ago!). Then the following year I went down to BDP Open House to try again...- Hotrodtractor
- Post #28
- Forum: 7.3 Aftermarket
-
body shop hurt my engine.....
Ouch. Major gray area..... yes them squishing the CCV hose is on them... they informed you of an issue that left everyone scratching their heads.... but the choice to drive it home is what caused the damage. I don't know how it all will shake out - but I certainly hope it goes well for you.- Hotrodtractor
- Post #9
- Forum: 6.7 Tech
-
Detuning large injector nozzles - How to pick injector size for upgrades!
I'm not going to go that far. Many people are happy with the injectors that he builds. We just happen to have some fundamental disagreements on how they can be applied. If he doesn't want to make full flow charts of his injectors available publicly in a format that can be compared then that is...- Hotrodtractor
- Post #165
- Forum: 7.3 Aftermarket
Members online
No members online now.