Search results

  1. Patrick Feeley

    Will a 1996 F6TZ-9A451-F engine wiring harness work on a 1997 f250 HD ?

    Looking at the factory EVTM diagrams, it looks like there might be some differences (there is some "weirdness" around the 97 EVTM info on the TPS wiring for one). I'll have to take a deeper dive if I have the time. Cheers!
  2. Patrick Feeley

    Will a 1996 F6TZ-9A451-F engine wiring harness work on a 1997 f250 HD ?

    See if these help. Is the big firewall feedthrough connector (C202) part of the harness? Cheers!
  3. Patrick Feeley

    Single Cab Passenger Window Not Working

    Thanks for the follow-up. Glad you got it fixed. Cheers!
  4. Patrick Feeley

    Can I swap two injectors?

    The different injector (long lead type) was a Super Duty specific thing to address the infamous "cackle" problem. It does not apply to your 96. You can swap the injectors. Don't forget to remove the fuel and oil that will drain into the cylinders before restarting! You don't want to...
  5. Patrick Feeley

    Trans slipping/shifting hard

    Looks like he's using FORScan, so he should be able to (his screenshots above show them). Cheers!
  6. Patrick Feeley

    Need help with EOT Sensor

    See the attached. Cheers!
  7. Patrick Feeley

    Trans slipping/shifting hard

    MAP frequency and pressure should move under load. BARO really shouldn't unless you're going up/down in altitude. Cheers!
  8. Patrick Feeley

    Trans slipping/shifting hard

    MAP and BARO should be reading about the same (as each other) at both KOEO and Idle. Cheers!
  9. Patrick Feeley

    Which mechanical gauges to pair with CTS3?

    Pyrometer, boost, and trans temp (if auto trans). Maybe oil pressure if you prefer to use MAP for boost. Cheers!
  10. Patrick Feeley

    ZF tranny reverse switch location

    Yeah, on a stock ZF5, it's the only wiring that goes to the trans. I did have a trans temp gauge fitting to mine. Maybe these will help the OP as well. Cheers!
  11. Patrick Feeley

    ZF tranny reverse switch location

    IIRC, driver's side just below the ID plate. Cheers!
  12. Patrick Feeley

    Whats normal?

    Warranty is only good if they back it up (make sure to thoroughly read the fine print) and the company is still around if you need it, Cheers!
  13. Patrick Feeley

    TC tail shaft installation

    I like The Right Stuff (Grey) or the Motorcraft TA-31, but I've never used them for your application. Cheers!
  14. Patrick Feeley

    Death wobble, my turn!

    Does having the camper attached unload the front end (do you run a weight distributing hitch?). Cheers!
  15. Patrick Feeley

    Steering column interchange

    What's the GVWR on that f250 7.5L? I've always been under the assumption that 8800 lbs and over were no required to have airbags. Also, there is nothing in the factory service manuals (Workshop or EVTM) for 1997 F250 HD regarding an airbag (anywhere: Steering column, power distribution...
  16. Patrick Feeley

    97 wont start

    Yeah, they might be a little low if he hasn't checked them since 2012. Cheers!
  17. Patrick Feeley

    Turbo pedestal oil leak after replacing O rings

    They've started getting the Garrett non-EBPV pedestals back in stock now. There more expensive, but I'll take the better quality. I've got one waiting to go on the 97. Cheers!
  18. Patrick Feeley

    Powerstroke swap wont start with key

    Here's C202 for 94.5 and 1996. Cheers!
  19. Patrick Feeley

    Powerstroke swap wont start with key

    The paper version of the EVTM is much better to flip through. I wish you could search the electronic versions by circuit number! I have paper in the 94 and 97 years and 96-01 on DVD (All Ford models with Shop Service, EVTM, and PCED). You want the EVTM for the year you have as there are some...
  20. Patrick Feeley

    Powerstroke swap wont start with key

    What you need is the 1996 Electrical and Vacuum Troubleshooting Manual (EVTM). It is broken up by system (engine controls, starting, charging, lighting, etc) and there are easily over 100 pages to it. Then you have to research each individual circuit number and find which pages are applicable...

Random media

front_suspension1
BB3C04D5-BB5B-4F75-9207-BBD824089A43_1
IMG_0043
IMG_0404
IMG_09451
truck15
cranking
IMG_0255
vajj
2011-04-12_17-33-51_835
My Baby :)
kg_3

Latest posts

Members online

No members online now.
Total: 367 (members: 0, guests: 367)
Top