Search results

  1. Fast-6.0

    Upgraded Turbos????

    Honestly it sounds like a mis-communication. If we knew you were going to pull it, I don't see us not honoring warranty if it wasn't gonna be here for a another few weeks. If it was 6 months later then sure.
  2. Fast-6.0

    Upgraded Turbos????

    Did you send it in for warranty? That is why warranties are in place because sometimes things have issues.
  3. Fast-6.0

    Building a 2.6 Sled Puller

    He does plan to run dual's and a Dana 80. And we would have already planned on 4.10's but since there is a 75+ hp gain just in leaving Colorado the exact gear ratio has yet to be determined. The Midwest sleds are no tougher, just the competition, this sled is a dragrace sled and was built by...
  4. Fast-6.0

    Building a 2.6 Sled Puller

    The truck has 350cc Injectors. It was running 4400rpm down the track. It has 3.73 gears and that run was in 1st gear 4 high. We expect it to pull more rpm at low altitude. As we really want it to run right around 5000 down the track.
  5. Fast-6.0

    700hp build plan

    The Jr's will be a 59/76. All journal bearing. Same exhaust tone as stock. The Tow X's are still gonna be around. Ball-bearing and sweet exhaust tone.
  6. Fast-6.0

    Building a 2.6 Sled Puller

    Sorry for the confusion. When the truck qualified top 10 it was a workstock truck. The point I was making was that it did well against much stronger dmax's and dodges, that's all. In 2006, I took my 6.0 there and placed top ten in the unlimited turbo class the first night of Scheids. Things...
  7. Fast-6.0

    Building a 2.6 Sled Puller

    http://www.youtube.com/watch?v=Oswm5hmkGU8&feature=youtu.be Go pro video of Hoodstack.
  8. Fast-6.0

    Building a 2.6 Sled Puller

    We don't really know what to expect from this thing. This is just the starting point really and he needs to get out there and just compete, even if its last place. Then we work on more power, etc. etc. That being said, in prior years this truck had placed in the top 10 at Scheids to MUCH more...
  9. Fast-6.0

    Rollpan Pictures

    Here's what Wayne did on mine. Urethane style.
  10. Fast-6.0

    Cracked blocks

    To clarify some of the questions. The hard block is effectively sealing the oil and coolant apart from each other. If a block is cracked, then the hard block is also limiting the block from moving as much (which IMO will stop a crack from growing because the block is no longer flexing as much...
  11. Fast-6.0

    Cracked blocks

    I really doubt you will get it down to a casting number. I have seen an early 08 block crack, 09 block, and 2010 block crack. Erik's block wasn't cracked, we did it to seal, if it did crack. My block was a practically new 08 block, torqued it with Custom Age studs and it was fine. Tore it...
  12. Fast-6.0

    I need help with a dilemma on Shorty and turbos

    I forgot to mention, I have a used set of high-powers and a used set of mpx. So......mp and hpx are not in the equation. Now what is the consensus?
  13. Fast-6.0

    I need help with a dilemma on Shorty and turbos

    So, I am having a hard time making a decision on what turbos to put on Shorty. The truck is a street truck. No cage, so I really just want it to be able to run an 11.5 1/4 mile up here in Denver. The engine will have Forged pistons, Carrillo long rods, offset stroker crank, Ported heads...
  14. Fast-6.0

    Building a 2.6 Sled Puller

    Good question. Its hard for Heui and 6.0L to compete but hp is not all it takes to win, so maybe.
  15. Fast-6.0

    Building a 2.6 Sled Puller

    http://www.youtube.com/watch?v=GVy1M2TsKRo
  16. Fast-6.0

    Headers I've been working on!

    Yeah those are what we have run. We made them work with 04 rails. Too much work for the result though IMO. I have run stock rockers with solid lifters and .500" valve lift at 5500 rpm in my 6.0, so the Harland is not requirement.
  17. Fast-6.0

    Building a 2.6 Sled Puller

    How many 6.0's you know that can spool an 88mm single :drool:
  18. Fast-6.0

    Headers I've been working on!

    Are you running 03 HPOP rails? The two sets we got from Harland only work with 03 rails. We had to do some serious modifications to make them fit.
  19. Fast-6.0

    Largest stock appearing turbo for 6.4?

    We won't. The 76 is the limit and I had to push Precision to build em.
  20. Fast-6.0

    Largest stock appearing turbo for 6.4?

    The turbo makes about the same power as our 76 we are going to release.
View older results

Random media

...
62388_4594336052469_818059015_n
20170502_2125491
IMG_20130518_093125_139
20170502_2125491
Dashdaq custom mount by Ricky
2011-07-21_18-41-57_912
Picture_269
for sale
..ready for the new grill
DSC_0520
after1

Latest posts

Members online

Total: 449 (members: 2, guests: 447)
Top