Search results
-
R
Fluidampr & M208 Lpop install
That’s the gasket. F4TZ6700A is the seal. Rusty- rusty1161
- Post #18
- Forum: 7.3 Aftermarket
-
R
Fluidampr & M208 Lpop install
You may need a longer bolt just to get the damper started back on the crank snout. You will use the original to secure the damper. Rusty- rusty1161
- Post #13
- Forum: 7.3 Aftermarket
-
R
No start...has me stumped
IPR wiring harness? I know you already mentioned the ICP connector, but it was my IPR harness that caused my no start. -
R
Ipr connector pigtail
I had the same thing cause a no start. Here’s mine after I cut it out. Also, in a pinch an old injector plug can be used too, if you have an old valve cover gasket laying around. Rusty- rusty1161
- Post #2
- Forum: 94-97 Tech
-
R
Hydroboost Conversion Done
https://youtu.be/8Nb_4XHHmSw I just came across this video. Has anyone had experience with changing the high pressure hose and improving performance Thanks. Rusty- rusty1161
- Post #224
- Forum: 94-97 Aftermarket
-
R
Front main seal replacement
All you should need is the balancer puller/installer. You can borrow/rent it from a local auto parts chain store for free most of the time. The rest is common tools unless your balancer is grooved. Rusty -
R
Front main seal replacement
The Melling M208 oil pump comes with the cover and new seal. It wouldn’t hurt to change it all while you’re in there. http://www.riffraffdiesel.com/melling-m208-low-pressure-oil-pump-lpop/ Rusty -
R
ZF6 -650 rebuild and other things I've done on my early 99 7.3 F350
Cool pic. Thank you all for your service. Rusty -
R
Sxe 366 boost port??
I have a boost sender fo my Isspro gauge installed in my SXE. I had to drill the port thru and the 1/8” pipe thread sender fit right in. Rusty- rusty1161
- Post #3
- Forum: 94-97 Aftermarket
-
R
Upgraded Power Steering Pump Installed
For the fittings, do these sizes sound correct? 7/16” male o-ring and 16mm swivel o-ring? Thanks. Rusty- rusty1161
- Post #46
- Forum: 94-97 Aftermarket
-
R
Who daily drives 300/200s
My apologies, wrong thread. Rusty- rusty1161
- Post #68
- Forum: 7.3 Aftermarket
-
R
Who daily drives 300/200s
For the fittings, do these sizes sound correct? 7/16” male o-ring and 16mm swivel o-ring? Thanks. Rusty- rusty1161
- Post #67
- Forum: 7.3 Aftermarket
-
R
Upgraded Power Steering Pump Installed
�� Thanks! Rusty- rusty1161
- Post #45
- Forum: 94-97 Aftermarket
-
R
Upgraded Power Steering Pump Installed
Hopefully this is the right pulley, it matches the engineering number Billy T. posted. For those of you that have done this mod, does it look correct in my pics? I didn’t have my calipers on me to take an accurate measurement. I have the pump, bracket and 🤞, the pulley. Now to to work on the...- rusty1161
- Post #43
- Forum: 94-97 Aftermarket
-
R
EBP sensor part number
http://www.riffraffdiesel.com/exhaust-back-pressure-sensor-94-96/ http://www.riffraffdiesel.com/exhaust-back-pressure-sensor-97-04/ Neither of these are $15, but they are Ford Motorcraft and not some questionable Ebay sensor. Riffraff has very reasonable and competitive prices. Rusty- rusty1161
- Post #3
- Forum: 94-97 Aftermarket
-
R
Power steering leak
The only successful fix I’ve had is replacing the whole line with a new one. Rusty- rusty1161
- Post #2
- Forum: 94-97 Tech
-
R
Poor fuel mileage
The speedo and odometer work hand in hand. Chips do not adjust the speedo. If you can still find one, get a Superlift Truspeed calibrator and wire that thing in. Rusty- rusty1161
- Post #27
- Forum: 7.3 Aftermarket
-
R
BW S300 series turbo drain gasket
This one? PM me your info, I'll drop a couple in the mail to you. Rusty- rusty1161
- Post #2
- Forum: 7.3 Aftermarket
