Search results

  1. White_monster

    How would a s366/S364 over s480 perform with stock fuel

    It will work. Compounds lose velocity after each stage so that's why the 80mm wouldn't be spinning as hard.
  2. White_monster

    How would a s366/S364 over s480 perform with stock fuel

    It'll work but you won'thave enough to spin the 80mm with stock fuel.
  3. White_monster

    My build-Going to try an s400...

    That too.
  4. White_monster

    My build-Going to try an s400...

    Thankfully I'm on xmas holidays very soon at my house so I can focus some time on this and get it finished up for Matt. With all that has gone on this year Matt has been so understanding and patient. Final piece to tack up is the waste gate piping and former the merge at the inlet of the high...
  5. White_monster

    6.0 manifold question

    The factory bolts are designed specifically for use in high heat applications so they don't gall and seize.
  6. White_monster

    ALRADCO!!!!

    I'll likely go back to oem if my alradco fails on me.
  7. White_monster

    83mm Turbine to small for Compounds?

    I'd agree with this. 800hp could be achieved with good gate tuning.
  8. White_monster

    83mm Turbine to small for Compounds?

    What A/R exhaust housing you planning to use. It should be fine with an 83mm turbine.
  9. White_monster

    build advice

    Grab some extreme studs from Mike at No Limit. You'll be fine with non vgt
  10. White_monster

    carrillo rods

    No. I didn't have to touch the skirts as my machine shop had done some work already and everything cleared.
  11. White_monster

    carrillo rods

    Sounds like a hot tank is in order for sure.
  12. White_monster

    where do you buy stock??

    Online metals and metal depot are my go to places for stock.
  13. White_monster

    carrillo rods

    I honestly took a chisel and knocked the piece that was being hit off. No grinding involved. Is that the best way to do it? No. But I wasn't about to tear the engine down and buy new cam bearings and such. In the future I know to machine that piece off before assembly starts.
  14. White_monster

    carrillo rods

    Pretty normal situation. I had to discuss this as well. If you re-learn it you'll need new bearings and such.
  15. White_monster

    Turbo Pedestal gasket part number

    The number I have is W302508.
  16. White_monster

    6.7 ford 6637 mod

    University student driving a 6.7 diesel. Hmmmm.
  17. White_monster

    Need shocks on lowered F250

    Yes I am. More adjustability with the hydro bump stops but way more work.
  18. White_monster

    Factory oil pressure Gauge?

    I like this. Could easily send the signal to the cluster after switching out the gauge.
  19. White_monster

    My build-Hard work pays off!

    Only thing you can do is try.
  20. White_monster

    Factory oil pressure Gauge?

    Interesting. I'm going to have to look through my wiring manual for these trucks.

Random media

IMG954242
blk_wheels2
IMG_3450
IMG_2817
2003 F250 6.0
IMG957160
rod1
Rudys
Loaded
Minotaur Parameters
2005 6.0
845DCA94-03AD-49A1-A9DD-BB7770B1BD63

Latest posts

Members online

Total: 551 (members: 1, guests: 550)
Top