Search results
-
Hard steer question/issue
I ended up having ball joints changed, again. The reman steering box is a bit sloppy, and the best the shop could do is 3*, without physically modifying the I beam. So yea, this truck still takes a lot of steering input, and I haven't had the want to to fix it, lol. It's not horrible, just... -
Won’t start issues
Check your wiring to the ipr. I've had the wires make contact down inside the plug, couldn't see it until I actually pulled the plug out of the valley to get a close look at it. Check icp wires also. If they short, the truck won't run.- psduser1
- Post #4
- Forum: 7.3 Tech & FAQ
-
Windshield washer fluid reservoir
Pull right out. Hose to the pump is on the bottom.- psduser1
- Post #2
- Forum: 7.3 Tech & FAQ
-
Fuel sending unit and wheel studs
Drop the tank, disconnect the wiring where it plugs into the frame harness, and disconnect the fill and fuel hoses. The fuel hoses take a quick disconnect tool, should be 5/16" or 3/8". Drive the big plastic nut off with a hammer and punch. If you're careful with the gasket, they are generally...- psduser1
- Post #2
- Forum: 7.3 Tech & FAQ
-
Tuning the 7.3 in current times
Yes, compounds. Won't do shit for the haze, but it'll be a lot funner to drive.😄😄- psduser1
- Post #222
- Forum: 7.3 Aftermarket
-
2000 f350 dually lariat
No chance of better mileage🤣 More smiles per gallon...- psduser1
- Post #28
- Forum: 7.3 Aftermarket
-
Sun visor
Sure. It'll be next week before I can get it shipped, tied up all weekend. Shoot me an email, I can get you a couple pics.- psduser1
- Post #9
- Forum: Exterior Parts
-
Sun visor
Cover shipping, and whatever it's worth to you. I've got tan or Grey.- psduser1
- Post #7
- Forum: Exterior Parts
-
-
E4od occasional slipping
Little update.. Boy says the transmission is doing better, doesn't seem to be slipping. He's driving it everyday, enough to get it thoroughly warmed up. Apparently, a new filter made it happy.... Still going to swap to a sd harness and 4r100, as time permits. He wants the 4x4, and, I'm sure...- psduser1
- Post #14
- Forum: 94-97 Tech
-
E4od occasional slipping
It's not the brakes, sometimes it occurs after the truck is moving. Acts like the torque convertor just failed. Few seconds later, everything moves perfectly.- psduser1
- Post #13
- Forum: 94-97 Tech
-
E4od occasional slipping
Just on start up. Everything looked good with the valve body.- psduser1
- Post #11
- Forum: 94-97 Tech
-
E4od occasional slipping
Dropped the pan, nothing unusual. Filter was tight, normal friction material. I don't think it is a fluid problem. I still haven't pulled any codes, so that's on the to do list. I'm pretty sure it's a valve issue, or converter issue, but, only when cold.- psduser1
- Post #9
- Forum: 94-97 Tech
-
-
E4od occasional slipping
Supposed to get a filter today. We'll get a look in the pan.- psduser1
- Post #6
- Forum: 94-97 Tech
-
E4od occasional slipping
Couple more details. Trans was rebuilt approx 25k miles ago, no problems except the po didn't like the converter lockup points when driven unloaded, i.e. no trailer. With a load, no problem.- psduser1
- Post #4
- Forum: 94-97 Tech
-
E4od occasional slipping
I'll have him check those things again, but the fluid has been full, and bright. No signs of overheating.- psduser1
- Post #3
- Forum: 94-97 Tech
-
E4od occasional slipping
Looking for a bit of info on this transmission. My boys 95 is having shifting issues, occasionally. No forward or reverse at times, and it seems to be when the Trans is cold. Not all the time, and not consistent with the weather, but worse the colder it gets. I haven't pulled any codes yet...- psduser1
- Thread
- Replies: 14
- Forum: 94-97 Tech
-
-
7.3 Exhaust options
99 should be able to use the sd exhaust, with a 4" dp.- psduser1
- Post #6
- Forum: 7.3 Aftermarket
