Search results

I need some advice, I'm building a 2010 rcsb street truck and I'm looking for a quick responding compound set up. I plan on trying to make 800 to 900 horse. I'm stuck between running Rudy 75/59 combo or building my own non vgt set up. Which set up would you all choose and why? If you say non vgt...

Hey guys I put a set of BD Diesel manifolds and uppipes on about 5k miles ago and the one on the passenger side blew out at the bellow. Does anyone know if another brand uppipes will work with the BD kit, these seem to be a little thin. I'm running a single turbo so I dont believe back pressure...

I'm looking for a set of lifters for my 7.3 build and I came across Manton lifters for a reasonable price. My question is has anyone used them before and if not what do you guys recommend?

I have a unlocked H&S Mini Maxx race tuner for sale $650 obo. I dont get on alot anymore so text is the best way to get ahold of me. 865-318-0579

Hey guys where do you get your misc bends and pipe for things like custom compounds or intercooler pipes?

So over the last year i have been working on my 69 f100 off and on. I have recently been considering a 6.0 and 5R swap, my question is what is the bare minimum that i would need to make it run? Obviously i would need the engine harness, FICM, and PCM. Do i need the gauge cluster or can i make it...

Hey guys i got a 2000 f250 im working on for a buddy of mine, that im having starting issues out of. The truck ran and drove fine until his cluch slave cylinder went out, the truck sat for about two months before he decided to replace it. I go to pick the truck up and of course the batteries are...

Hey guys I'm looking to pick up a spare short block for my 2006 so I can start my build, is there any differences in the years that I should look out for?

Hey guys, i am looking for the part number to the rubber o ring gasket that is on the bottom of turbo pedestal. I checked the diagrams on sunrise ford's website but cant seen to locate it. I'm trying to put my single turbo pedestal back in and i ripped the gasket by accident :doh:

Hey guys im looking at a used transmission that the seller claims has been rebuilt with aftermarket clutches but said the torque converter blew up in. He said he didnt try to drive it at all and that all it needs is a new set of solenoids but he returned the truck to stock sold it. Ive talked...

Hey guys quick question, what is the thread size on the two rubber lines from the front of the head to the factory fuel bowl? I thought they were -4 but im not entirely sure and i dont wanna order the wrong fittings.

Hey guys i got a couple things i need to get rid of, if you have any questions send me a pm. Everything below does not include shipping. 71/58 industrial injection turbos ( the high pressure turbo needs to be rebuilt due to a bad oil seal and exhaust leak out of the vgt actuator arm) 1200.00...

Ok guys i recently got my 6.4 back together after rebuilding the engine and im having higher than normal egts and boost lag at a low rpm. Ones boost get up to about 10-15 psi the truck takes off like a rocket. Ive checked for boost leaks and exhaust leaks but i have found any. I just made a trip...

Hey quys quick question can i just pull the low pressure turbo to replace the oil drain or do i need to pull both turbos?

Quick question what is the torque spec on the supply and return line on the HPFP? I found the procedure for the lines to the heads but not the supply and return.

Hey guys I was looking at the paperwork that came with my torque converter and it says to only install the spring if you are heavy working or racing. I drive my truck everyday and rarely pull anything over 8,000 lbs should I still install the spring?

I'm wanting to delete my fuel bowl and use the regulator on my air dog to set the pressure. Would it hurt the hpfp by running a -8 line directly to it?

Hey guys I have a quick question I'm wanting to install a stage one cam in my truck and I was wondering do I have to drop the crank to remove and install the cam? It looks like the crank is in the way of removing the cam. Thanks in advance for your help guys!

Hey guys I need some advice on which converter to get. I'm going to be running Midwest Diesels billet 66 single and I was thinking about running the 1800 stall converter. The questions I would like to ask are is this converter going to be good for DD and a good match for the single? I also...

I'm looking for a good machine shop around Knoxville to have my bottom end balance on my 6.4, my usual machine shop that has done all of my gas engines says he can't balance it due to weight :shrug: . Any suggestions from anyone?