Search results

  1. R

    Injector Balance/Trim Range

    I had a fairly new injector get to 12, I noticed a difference in mile/tank and on a tank and investigated as i usually did within 15 mi per tank every time. Sent that injector back in (30%) they confirmed an issue and sent another new one. My wife myself and son all drive diesels (VW/Audi ftw)...
  2. R

    2006 F250 5R110W Trans Issue

    Fair possibility of the wire for the button being damaged, see it more often on the Chevys, have you checked codes for trans?
  3. R

    2008 6.4 advice

    I used the RCD billets, actually made by Wagler of duramax fame. Totally not necessary but I wanted to not have to ever worry about it at 1k hp daily. I got them for near half price at cost over retail, I needed rods anyway so what the hell. They have H11 bolts etc, the locking system on the...
  4. R

    2008 6.4 advice

    The factory machine work on these was awful to say the least. I bought the maxxforces turned chucked them in a friends cnc and delipped myself. If anyone does cerakote near you like for guns etc they can coat the crowns after you do them. I ended up at around 18k cost on parts on mine but that...
  5. R

    2008 6.4 advice

    I’ve heard that the choate valve covers have many issues, I looked into them on my build. Had a couple of private convos with a few that had actually bought them. Only difference in the trans is the torque converter, super early 5r110 had a few issues that were remedied around 2004. There are a...
  6. R

    Power mirrors from Lariat on XLT?

    You could add in the missing wiring, it would take a bit of work, but easier than swapping dash harness.
  7. R

    Power mirrors from Lariat on XLT?

    Ok so look at the connection in door jamb, sometimes not all of the wiring is in the harness, power mirrors are fed by fuses 12 and 25 in the fusebox on pass side kick panel, power fold is fed by fuse 31 under hood box. May be wiring missing in the dash harness that feeds and connects the doors
  8. R

    Power mirrors from Lariat on XLT?

    We’re the connectors in the door for the mirrors and we’re all the wires present, same count and arrangement as the new mirror?
  9. R

    Pedal Commander

    I’ve installed these on plenty of jeeps or you can just for it. They don’t add or decrease power as mentioned, just alter the response curve. Some people love them have them removed.
  10. R

    HP MPVI3 Tuner?

    It can be done via hp but you’ll have to use and have the ability to make “user defined parameters”
  11. R

    08 f350 xl window converted

    May be a bit of work swapping harness or adding wires but should be able to be done not too difficult. Probably need body module out of donor truck.
  12. R

    A new pump solution has been found.

    I’ve known about these for awhile, they’ve put lots of R&D into them and those guys don’t screw around, I believe it will be a good product. Time and differing fuel qualities, filter change intervals etc are always the unknown once they get to the end users.
  13. R

    Auction truck

    You can get the pan off in frame but if you’re going that far I’d pull it. I did my 6.0 cam in truck cab on while I was doing headgaskets. Had trans out for a freshen up. The 6.4 have their issues and all but damn things haul ass. Mines been 11.89 at 114 with a canned tune, I’m on big sticks and...
  14. R

    6.4 powerstroke turbo

    I ended up with a 74mm low pressure and a stock high pressure with a billet wheel. kC didn’t have their chargers ready to sell yet. I know the hp turbo is a big restriction that causes some of the tuning issues. I would’ve liked to go single but I was afraid of issues towing.
  15. R

    Hard block vs girdle vs both

    I ran short filled gasser engines on street for a few years. The filler is mostly to help with keeping the cylinders round and strengthens the mains some. In the sbf world before aftermarket blocks were readily available a main girdle with studs and a short filled block was the norm. I wouldn’t...
  16. R

    After market replacement fuel tanks

    Another shop here in town was installing a S&B tank the other day when I went over to flash a pcm for them. There was a spacer plate laying there for the sender, they were waiting on a new strainer to install it. I noticed it had a drain on it as well. I haven’t talked to him since to see how it...
  17. R

    6.4 Blend Door issue

    Sounds like you need left blend door and a mode door actuators
  18. R

    Late to the party

    Don’t update it or you’ll lose ability to do such things. There are still some that may be able to accommodate but it’s getting hard to do.
  19. R

    Reprogramming ACM

    I haven’t as I always upgrade to aftermarket. I have the original nav/touchscreen from my 08 I would sell if if you’re unsuccessful.
  20. R

    DTA360 Re-Power

    This will be interesting, I’ve got a 93 intl fire truck at the shop now with the 360 in it.

Random media

eleanor_part_two_16_
photo-6
Ol' DIRTY GIRL
White_monster intake
c6e4dd6d-1310-d8cb
v
Hot_Rod_RAcer
20220319_092616.jpg
Weight Reduction,one part at a time
plati1
110115_180935
image40

Latest posts

Members online

No members online now.
Total: 533 (members: 1, guests: 532)
Top