1995 7.3 IPR wiring question

[Marty]

On the wiring harness that the fuel bowl/IPR stuff plugs into, can someone look and tell me what color wires they have for the IPR. We have a truck here missing several sections of wiring harness and that's just one of them. I don't have another OBS here to reference.

So just to make sure I am clear I need the colors of the 2 wires in the plug that feeds the plug that connects to the fuel bowl and IPR, for the IPR.

 

[strokin'_tatsch]

So the two wires on the engine harness side of the fuel bowl connector that are for the IPR? I'll run out to my truck and check it for you.

 

[Marty]

Yes that's exactly what I mean, options are;

Yellow/Red
Red
Red/White
Red/Black
Red/Green

There are also pin positions, a, b, c, d, etc...

 

[strokin'_tatsch]

Mine are tan/red stripe and solid red. I went up the harness a little way and I guess the wires are faded. Its not yellow at all. Here's some pics off my phone.

EDIT: I didn't see your reply until I got back in the office. If you need to know which letter positions they are in, I can go back out and look again. I didn't think to check them. lol

Sent from my SAMSUNG-SGH-I337

 

[Marty]

Sure look at the letters for me, thanks.

 

[FrankTheTank]

just let me know when u got a chance, and i will swing in there and u can look at it. every time i stop in your busy

 

[strokin'_tatsch]

The solid red wire is in position D and the tan/red stripe wire is in position E. Those letters are the same on both sides of the connector.

I'm sure my tan/red stripe wire used to be yellow a long time ago.

Now, unrelated to the IPR, the red/white stripe wire is in position C, red/black stripe in position B, and red/tan stripe in position A. These positions don't matter and aren't needed. You can delete all the fuel bowl wiring if you want and just keep the IPR wires in the connector. Obviously by the pics, that's what I have done.

Hope that helps some. If you need anything else, let me know.

Sent from my SAMSUNG-SGH-I337