1995 7.3 power steering leak

[rafaelb]

I have a 95 7.3, new power steering pump and hose. Installed both today only to find out i have a major leak coming from the threads opposite the pump fitting(steering box side). The new hose only came with a Teflon seal for the pump side no seals for the flared side. My question is, is there supposed to be an o ring or something to seal the flared side. If not how do I get the fluid to stop seeping past the threads?

Here is the link for a pic of what I'm talking about https://www.napaonline.com/en/p/PSK72409

 

[rafaelb]

Its leaking from the new bright silver fitting

 

[gnxtc2]

Flare fittings don't require o-rings or sealers. Post a pic of the hose end.

Did anyone ever change to gear box? How many bolts are holding the top plate on the gear box?

Billy T.
[email protected]

 

[zilla68]

Its leaking from the new bright silver fitting

iirc you can over tighten the hose threads and pop it out, i did that one time on mine, i just unscrewed it, tightened it down snug and it was fine after that.