2" lift with 35s?

[Sideswipe505]

So I'm planning on putting some 20x10s with 35s on my truck in the near future. Truck currently has stock suspension on it. Will a 2" lift give me the necessary clearance to run them? Wheels I'm planning on going with are Fuel Octanes. Thoughts?


Sent from my iPhone using Tapatalk

 

[PSD]

They will rub but will fit if thats what you're asking

 

[MARSHALLLANE]

So I'm planning on putting some 20x10s with 35s on my truck in the near future. Truck currently has stock suspension on it. Will a 2" lift give me the necessary clearance to run them? Wheels I'm planning on going with are Fuel Octanes. Thoughts?


Sent from my iPhone using Tapatalk

It's all about offset

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Lipka101]

It's all about offset

:whs: -12 offset won't rub. Anything more probably will.

 

[AllGo'N'Show]

^^ x2

Stock height w/ 35's and barely kisses the inner fender liner. Offset offset offset

 

[golfpro2301]

I have 350 blocks on rear of my 2010 250. The font has a 2" level. The guy I bought it from did all this and put 35x12 on it I believe with 20" lariat wheels. Never had any problem with rubbing. The tires look like they stick out about .5" on front and 1" on back

 

[08 stroker]

2010 F350 cc/lb
20x10 wheels -19 offset
35x12.5 tires
stock height

Minor rubbing on the inside of the wheel at full steer. 5 minutes and two 12 inch zip ties cured the rubbing issues.

 

[08IH6.4]

nothing tin snips cant fix