2015-2017 Lift Compatibility

kienelso · Apr 1, 2019

I have access to a 6" radius arm lift that came off of a 15' F250 from a friends truck and wanted to know what parts are interchangeable to put on my 17' F250. I tried to contact Zone offroad and they told me I needed an entire new kit but I believe that some parts should switch over.
Parts I am not sure that are compatible are
track bar drop bracket
radius arms (I want to think they are the same but want to confirm)
I know I will need the following regardless
drop pitman arm
brake line brackets
cv boot clamp for front driveshaft
U-bolts
Has anyone been able to switch over kits from the older gen trucks or know which parts remain the same between years?
Any help is appreciated.

sootie · Apr 1, 2019

Track bar and track bar bracket are the only things different to my knowledge.

Sleepersilverado · Apr 1, 2019

Took 3 link off my 15 and put it on my 17

kienelso · Apr 2, 2019

Were you able to reuse your track bar bracket or did you not need it with stock suspension or a smaller lift? This confirms that the radius arms should work as I was hoping, thanks.

Sleepersilverado · Apr 4, 2019

I had adjustable track bar on 15 and used new track bar drop bracket on 17. I would have to go compare the bracket I took of to the one on my 11.

kienelso · Apr 5, 2019

I was able to confirm through BDS that the track bar brackets are slightly different on the 17+ trucks

Jonnydime · Apr 6, 2019

I'm running a 2017 track bar bracket on my 2008 with no issues. :shrug:

lincolnlocker · Apr 7, 2019

The bracket should be the same. Its the axle end that is different on the bar correct?

live life full throttle

kienelso · Apr 8, 2019

I believe the axle ends are different yes. What leads me to believe there may be a slight difference is PMF has an option for 08-16 and 17-19. To me they look the same but there may be a slight difference, perhaps in the height location of the actual track bar bolt due to the newer trucks being slightly taller from the factory?