20x10's on an obs

[powerSmokin]

Alright so I'm ready to do wheels and tires but I can't find a likeable chrome wheel that doesn't cost as much as a MHT Krank! I like that style of wheel and found moto metals in a 20 but they only come in a 20x9 or 20x12 as far as I can find any other recommendations on wheels post em up.

Gonna do a -24 offset on either 33x12.50x20's or 305/55/20's depends on tire prices. Mind you this is on a 250 with a leveling leaf that sits on 285's right now so it will be a tight fit.

 

[davey99ps]

I don't really have any recommendations, but I've been looking at rims an I'm pretty sure I'm gonna go with 18x12's if I can find some but I'm curious how the 20's will look on yours

 

[bluedge8]

pretty sure mine are 20x12's and they have 325/60/20's on them on a stock f350 with the front end sagging a bit. they sit so close to the fenders I can't believe they have only rubbed once when I had them on, I'd want to go up in the front a couple of inch's to make them a little better, but the width hasn't seemed to be a problem.

 

[powerSmokin]

My sister has a 350 obs and it sits like 2"'s higher than mine but I don't want to go that tall. I use my truck bed quite a bit and I'm only 5'7 so a lifted truck is just out of the question. I have seen 20's and they are just about the largest amount of rim I would go.

18's in tires seem to be the same price or more its weird.

 

[zilla68]

I like the 18 inch over the 20, I love rockys truck that won the diesel challenge

 

[powerSmokin]

I have been skimming through pics on the obs thread and 18's look good but the 20's with the right tire do too. I'm not a fan of more rim than tire but sometimes I prefer it if its te right wheel/tire combo.

 

[davey99ps]

I have been skimming through pics on the obs thread and 18's look good but the 20's with the right tire do too. I'm not a fan of more rim than tire but sometimes I prefer it if its te right wheel/tire combo.

Yea I agree, Chase's (not enoughsmoke) crew cab looks great with 20's an 36's, but I've seen a few others with 20's that look way to big. Your also right about the tire cost, it seems like tires for 18's are extra expensive, but so far that's been my favorite size for obs trucks.

 

[powerSmokin]

18's are a lot more popular than 20's and in higher demand that is why, going shopping after work tomorrow to get an idea what's availiable locally and how long it takes to order.

 

[StrokerTurbo7.3]

I have 20x10

 

[Trav-O]

Do you like the Moto Metal 962s? We just put a 18x10 set on a customers ride with ATZs.

 

[powerSmokin]

I am leaning towards the 962's everytime I look at em ha. Good looking wheel and not stupid expensive!

 

[Trav-O]

Ya, we got him hooked up for $2200 for them and the ATZs

 

[powerSmokin]

Sounds about right

 

[powerSmokin]

Just ordered up some moto metal 962's in a 18x10 -24 offset and some 325/60/18 open country AT 2's, should be going on this weekend or beginning of next week. Gonna look sweet!

 

[powerSmokin]

Pics of the new set up

center caps are off and still have to be cut to get them to fit.

 

[StrokerTurbo7.3]

Looks awesome! I want these but 20x12 now. What are you doing to the center caps?

 

[powerSmokin]

I'm supposed to either get some cap extensions or just cut the tops to fit. Haven't decided yet. They will be going on here in a few weeks which will complete the look. If rather have it cut so I can lock in the hubs for the front.

 

[Coops Customs]

LOOKS Sweet:naughty:

 

[Strokin572]

So what is the biggest sized tire that will fit on a non lifted F250? I'm looking too, and yours looks sweet could you measure from the ground to the top of the fender well did it lift the truck at all? That's the look I'd like with mine.

 

[powerSmokin]

All I have is a leveling leaf in the front and that's it for suspension upgrades. I could have gone with 35's since it was a wider offset but it would be really tucked and you couldn't flex your suspension much or it would rub.

I did have to cut the front bumper at an angle so I could turn the tires.