5/8" tube in sending unit HELP

[Strictly Diesel]

If you can leave the flex tube long enough to stick out the hole where the sender goes (so you can make the connection) but not so long that it kinks when you push the sender in the tank, it might work.


Fat fingered on my iPad...not responsible for typos!

 

[zilla68]

dennis
will the white hose from fass hook up to the 5/8 suction line without any modifictions? is the id the same

 

[m j]

the factory tank has a sump about the same size as that add on thing
why spend that $$ when all you need to do is place your draw straw in the factory spot to achieve the same effect

 

[zilla68]

the problem is the draw straw doesn't go to that spot from the sender. I have the tank being cut and rewelded to house the new sump, then the draw straw will be cut and attached to the white hose in the kit that will go to the sump.

the way the sender and 5/8 tube are, the tube isn't close to hitting the bottom of the tank, so this way will work better than before.