6.0.4 revisited

TheReelMuhcoy · Nov 7, 2014

Ordered a 6.7 fuel pump.

I am adding a manual HPOP gauge, relocating the ICP sensor and running a line to the cab for the gauge.

Sent from my iPhone using Tapatalk

Idiesel · Nov 7, 2014

Cool, always interested in news on this. Where'd you find that block for the icp sensor?

jcordova904 · Mar 29, 2016

Info

I know your post was quite a long time ago, but I was wondering if you had any details of this plate and your build? Pics? Parts list? Thanks for any info

TheReelMuhcoy · Mar 29, 2016

I am driving ATM, but here are a few teaser videos. We bought a truck dedicated for building so I wasn't screwing with my personal truck all the time. It's a RCLB stripped to bare bones, will be getting a full roll cage soon, and many other goodies!!

http://youtu.be/XOlRYce1rhY
http://youtu.be/PGH2khtBtpk
http://youtu.be/Y2_sit74OiM

sootie · Mar 29, 2016

That is freaking awesome. why are you running such a large diameter slick? do you eventually plan to upgrade the turbos?

superBADduty · Mar 29, 2016

Damn!

You spun those slicks all the way down the track!
And was that a 40 mph to like 80 mph tire spin? I couldn't make out the speedo too good.
Great job keep up the great work.

TheReelMuhcoy · Jun 1, 2016

sootie said:
That is freaking awesome. why are you running such a large diameter slick? do you eventually plan to upgrade the turbos?

superBADduty said:
Damn!

You spun those slicks all the way down the track!
And was that a 40 mph to like 80 mph tire spin? I couldn't make out the speedo too good.
Great job keep up the great work.

Thanks guys! We really appreciate the positive feedback since this project was fueled by negativity.

I really am only running those slicks because they were the only used slick that I could find that somewhat fit my application. We do plan to go a lot bigger with this truck. The next build will put this one to shame. I just became a vendor of M&H road master tires and they offer a slick with the same width with a little less height (about 33") that is pretty much what I would like to run.

SuperBad, Yeah, the truck will break the tires free all the way up to 60mph, I have yet to take the truck onto the highway since I put in the 4.11 gears and 225cc injectors. I am pretty sure it will break them at 80mph locked in 5th now too.

I'll take all the negative comments that anyone has on the next build since I need some motivation :gun: We're going run a set of 6.4 compounds on each bank, twin compounds, and run Warren's new 600cc+ Hybrids. GOIN' FOR BROKE!