6.4 Head Stud Tools Possibly Wanted

[bts]

I'm thinking I might do head studs on 6.4 myself. Is there anyone that has purchased the tools and would like to sell them? Am I missing anything that you would recommend?

Looking for
Injector connector removal tool
Head Lift Bracket
Turbo Lift Bracket

Thanks,


Sent from my iPhone using Tapatalk

 

[CT9AIX]

No special tools needed for any of those items you listed. I'm assuming your going to have the cab off for this... Use a engine hoist to yank the turbos off and put them back on (just use a 10-12" piece of chain and bolt it in the center of the two turbos where they join together), just grab the heads and pull them off your self, and use a very small flat head screw driver for the injector clips. Used those methods 20+ times on 6.4's and never had an issue

 

[78f100]

Whs, if you eat your Wheaties you can lift and replace turbos by hand. I do it all the time.

 

[bts]

Thanks guys, going to try the can tilt mentioned on a couple of forums. I'll start bulking up!!


Sent from my iPhone using Tapatalk