66/88 Compounds

Jeremy @ No Limit · Dec 18, 2014

Your's isn't compounds though

swinky · Dec 18, 2014

I have a lot of room to spare. I could get mine spooled on the line with the stock 1800 stall. Not many people running compounds on 6.0s on here so good luck :flipa:

extended power is running a 66/88 setup I believe. shoot him a PM.

Jeremy @ No Limit · Dec 18, 2014

I gotcha! Thanks!

Extended Power · Dec 18, 2014

A higher stall will work wonders.
I had a higher stall in mine for about 4 hours...then found that the nuts on the torque converter came loose, and cut halfway though all the studs on it.
I'm running a stock stall speed triple disk and don't have issues spooling at all.

BlueWaffle · Dec 18, 2014

i had 2200 stall for my compounded trucks. worked very well IMO.

andrewsteelerford05 · Dec 18, 2014

I ran a 2200 in my first built trans. Now I run a 2400 stall in the Trans the truck has in it now. I like 2400 stall in my trans now.

Six_Sloww · Dec 18, 2014

andrewsteelerford05 said:
I ran a 2200 in my first built trans. Now I run a 2400 stall in the Trans the truck has in it now. I like 2400 stall in my trans now.

2400 is probably paired better with a large single, I don't think he'll need that much stall with 66/88

Jeremy @ No Limit · Dec 18, 2014

I appreciate the input guys! I was thinking around 2100, just looking for first hand experience and verification. Spoke with Andy today as well. Going to be ordering a kit from him soon

99powerstroke62 · Jan 15, 2015

Any updates on this?

Jeremy @ No Limit · Jan 15, 2015

Waiting on the injectors to get back from Holders. We've been super busy at the shop. Moving, reorganizing and such. I found time to pull the 205's and send in for mods. And i've upgraded both turbos to 360 thrust bearing and billet wheels. Going to start fabbing pipe next week.

99powerstroke62 · Jan 17, 2015

What size injectors did you end up going with?

Jeremy @ No Limit · Jan 17, 2015

300/125% conventionals. Going to add Bob's HPOP from DieselSite as well.

swinky · Jan 17, 2015

Jeremy@PHP said:
300/125% conventionals. Going to add Bob's HPOP from DieselSite as well.

Just one pump?

Jeremy @ No Limit · Jan 17, 2015

At first yes. DieselSite claims their pump with handle 300's.....I plan to test that!

If it doesn't hold ICP then i'll add dual pumps

swinky · Jan 18, 2015

Jeremy@PHP said:
At first yes. DieselSite claims their pump with handle 300's.....I plan to test that! If it doesn't hold ICP then i'll add dual pumps

I talked to Jennifer a couple weeks ago and she told me a 270 conventional will hold icp. I honestly am skeptical but we'll see. I only plan on running 250s so your testing will be helpful.

Jeremy @ No Limit · Jan 18, 2015

Yea thats what i'm hearing. Some say 270ish. Their website says "most hybrids and conventionals up to 300cc". We shall see...

6 L chevy eater · Jan 18, 2015

very curious to see how these injectors are goin to work out!!

please tell me you put set of rods in it so u can spray the house downwhen ur ready!??