Breaking Habits
New member
Selling my full rotating assembly for my pulling truck motor.
I had this in my previous engine that made over 1200 RWHP with stock appearing turbos and nitrous, and had a failure in a cylinder head that caused piston damage. The assembly had roughly 350 miles on it.
I had a set of FSR pistons made by D&J Precision Machine in Ohio for this set up with a 4.0" Bore. This should equal roughly 7.0L of displacement overall.
With the 3.89" Bore set up it was extremely torque and very, very responsive even at high elevation in Colorado. The torque was absolutely unreal.
Everything is like new, no damage, perfect. The pistons are brand new.
I had every intent of putting this back together with a large pair of precisions, but have since parted the truck out in favor of purchasing more farm ground
This set up includes
Stroker Crankshaft
Custom Length Carrillo Connecting Rods
H13 Tool Steel Wristpins (Duramax Spec)
(New)D&J Precision Machine FSR 4.0" Bore Pistons w/ Valve Reliefs & Custom Bowl
Billet Stage 2.5X Camshaft w/ Custom Small Base Circle
All this needs is to be balanced, order your spec of rings, and install.
This will need to be installed in a sleeved block.
You would have close to 20,000 to duplicate this set up.
Looking for $14,500.00 for the set up. For $500.00 I will include my cylinder block
Message for details, inquiries.
No tire kickers, no trades, no nonsense.
This is a drop in and go set up to hold 1600+ Horsepower, or go in an aggressive street truck
Thanks,
Jared
I had this in my previous engine that made over 1200 RWHP with stock appearing turbos and nitrous, and had a failure in a cylinder head that caused piston damage. The assembly had roughly 350 miles on it.
I had a set of FSR pistons made by D&J Precision Machine in Ohio for this set up with a 4.0" Bore. This should equal roughly 7.0L of displacement overall.
With the 3.89" Bore set up it was extremely torque and very, very responsive even at high elevation in Colorado. The torque was absolutely unreal.
Everything is like new, no damage, perfect. The pistons are brand new.
I had every intent of putting this back together with a large pair of precisions, but have since parted the truck out in favor of purchasing more farm ground
This set up includes
Stroker Crankshaft
Custom Length Carrillo Connecting Rods
H13 Tool Steel Wristpins (Duramax Spec)
(New)D&J Precision Machine FSR 4.0" Bore Pistons w/ Valve Reliefs & Custom Bowl
Billet Stage 2.5X Camshaft w/ Custom Small Base Circle
All this needs is to be balanced, order your spec of rings, and install.
This will need to be installed in a sleeved block.
You would have close to 20,000 to duplicate this set up.
Looking for $14,500.00 for the set up. For $500.00 I will include my cylinder block
Message for details, inquiries.
No tire kickers, no trades, no nonsense.
This is a drop in and go set up to hold 1600+ Horsepower, or go in an aggressive street truck
Thanks,
Jared
