BorgWarner 4407 Front Driveshaft Leak

[DudeManScott]

What do I need to do to remove/replace the front seal?
Do I need to split the transfer case?

Does this kit include the seal that should fix the leak?
https://cobratransmission.com/bw-4407-gasket-and-seal-kit-55009003-1

 

[m_j]

looks like you take the yoke off, pull the seal, replace the seal and reassemble.
if that is the only seal you need dont buy a whole kit

 

[m_j]

http://tcase.rsgear.com/technical/d...rner-4407-transfer-case-mechanical-shift.aspx

I think its this one.

https://www.rockauto.com/en/partsearch/?partnum=4333N

 

[JCart]

Thanks m_j,
Dudeamanscott, check the tech drawing, as it might be part 50 or could even be part 3 if the yoke nut is a bit loose. Reason I say this almost a year ago I did a Dana 60 swap to my sig truck and I forgot to replace the seal #3, found it after I put in the new driveshaft, thought I’d wait to see if it’d leak so far it hasn’t but the yoke is tight.
j