BW S369?

[Powerstroke Man 6.4]

I read a article and it said BW coming out with a S369 and they will flow close to 97-99 lb/min.

http://www.enginebasics.com/Product Tools/Borg Warner S366 S369 Release.html

 

[SEABEE08FX4]

It is proposed to do 100 lbs per minute but not confirmed yet, we will have them listed soon.

 

[Derek@Vision Diesel]

That is perfect! There is definitely a market for that in the powerstroke world

 

[JDub]

They announced these at SEMA and we were told they'd be ready by mid-summer, but I'd bet it's the end of the year before we can get our hands on one.

 

[PABowhunter]

Sounds like a good turbo. What does a 468 flow? 95lb/min?

Their upgrade to the 366 sounds impressive too. Gaining 8 lb/min with a new compressor wheel.

 

[Nick284]

This sounds interesting. I run a 468 i believe it is 95 or so. Interested to see what other comments!

 

[SEABEE08FX4]

Sounds like a good turbo. What does a 468 flow? 95lb/min?

Their upgrade to the 366 sounds impressive too. Gaining 8 lb/min with a new compressor wheel.

95/98

 

[Powerstroke Man 6.4]

http://www.htturbo.com/S300SX-E-66-74-91-p/s300sx-e-66-74-.91.htm

 

[JDub]

The new 66 and 69 are sounding like they'll be the cats meow, especially at the newly announced prices. Can't wait to get my hands on one. Supposed to be ready to ship first week of August.

 

[08Monster]

Interested.

 

[Nick284]

i run a 467. so this 369 is going to put out the same air and would spool better do to the smaller housing of the s300? anyone planning on running one soon?

 

[Powerstroke Man 6.4]

i run a 467. so this 369 is going to put out the same air and would spool better do to the smaller housing of the s300? anyone planning on running one soon?

I read to will flow the same as a S472.

 

[swinky]

I should be beating the snot out of one in a few months on the old 6 leaker.

 

[Powerstroke Man 6.4]

I should be beating the snot out of one in a few months on the old 6 leaker.

I wonder if it has 360 thrust etc?

 

[swinky]

I wonder if it has 360 thrust etc?

Most likely

 

[JDub]

Yes, fmw compressors and 360 thrusts are standard.

69 flows close to 100lbs-min which us more than a 467. Turbine side is smaller on the 369, so it will spool better but wont likely have the same top end due to higher drive pressure.

Should be a great middle of the road option. With spool like a 366 but power similar to a 467

 

[Powerstroke Man 6.4]

Yes, fmw compressors and 360 thrusts are standard.

69 flows close to 100lbs-min which us more than a 467. Turbine side is smaller on the 369, so it will spool better but wont likely have the same top end due to higher drive pressure.

Should be a great middle of the road option. With spool like a 366 but power similar to a 467

So on a 6.4/6.0 what would be the "HP rating" for it?

 

[TyCorr]

750hp

 

[swinky]

So on a 6.4/6.0 what would be the "HP rating" for it?

I'll be expecting 700 on fuel, 850 spray with 255/100s. Gated obviously.

 

[Powerstroke Man 6.4]

750hp

I'll be expecting 700 on fuel, 850 spray with 255/100s. Gated obviously.

Awesome should be a awesome middle of the road charger.