CCV mod

3brorce · Apr 24, 2013

Same way mine goes also.

Fordtrucks · Apr 25, 2013

04hdfatboy said:
Is your routed back to the intake?

No, mine is not. You could, but I didn't. I also run the Elite intake elbow and it doesn't have a provision for a CCV inlet anyways.

Fordtrucks · Apr 25, 2013

http://www.diesel-filters.com/search.php?search_query=ccv6000

04hdfatboy · Apr 25, 2013

Fordtrucks said:
No, mine is not. You could, but I didn't. I also run the Elite intake elbow and it doesn't have a provision for a CCV inlet anyways.

Mine isn't either. I run the no limit setup and i love it. Mine is routed to the nc hornet catch can

LovinPSDs · Apr 26, 2013

Anyone have any idea what the plug size is in the AFE kit? I have the no limit CCV but need to plug where the factory spot is... Keep forgetting to see what is it:fustrate:

Beans71086 · Apr 26, 2013

You could get two 3/8" fender washers and a 1"x3/8" bolt and LOCK nut. Just sandwich the rubber grommet in there. Be sure to use a lock nut though, I wouldn't want that nut backing off.

ZombieSoldier · Apr 28, 2013

I ran mine on my '99 down alng the frame rain to a billet catch can, then vented it to the atmosphere.

6point0damn2004 · Apr 28, 2013

Rubber chair feet you can get at Lowes also work really well for blocking the intake CCV tube. And no chance of losing a nut

CT9AIX · Apr 28, 2013

Very simple, go to Lowes, Home Depot ect... Any hard ware store and buy a 1" PVC plug. It fits in perfect just like the Afe plastic connector would for the CCV tube, and there's nothing to mess with. Ran that on my Afe Stage 2 Si intake for 20k miles with no issues.

Bosshawg600 · Apr 29, 2013

Gong to do this when I get my programmer in and finally tear into my pile of parts.....

But after looking at the can today, has anyone just pluged to outlet on the oil fill and replaced the cap with a Valve Cover breather with an internal baffle??? or is that just too messy........

Beans71086 · Apr 29, 2013

Bosshawg600 said:
Gong to do this when I get my programmer in and finally tear into my pile of parts.....

But after looking at the can today, has anyone just pluged to outlet on the oil fill and replaced the cap with a Valve Cover breather with an internal baffle??? or is that just too messy........

I dunno about messy, but I took the stock hose off mine for a day until got some hose to route it to the ground. All you can smell in the cab is oil, not very pleasent at all.

Bosshawg600 · Apr 29, 2013

Beans71086 said:
I dunno about messy, but I took the stock hose off mine for a day until got some hose to route it to the ground. All you can smell in the cab is oil, not very pleasent at all.

Good Point, Last thing I need is more fumes in my cab, already have an exhaust leak that come throught the steering wheel that I havent been able to track down!!!