NRHX2009
New member
2 Like new BFG All Terrain 315/75/16 tires. Ran for most of this season but tires are in excelent shape, no chunks missing etc... $200 each
2 like new 36x14.5x16" Trxus STS Tires mounted on 16x12 Mickey Thompson Classic III wheels. 8x170 bolt pattern for Ford D60 Front. Wheels are Like new. With center caps. $900 for the pair
Terminator Dual HPOP Setup. I had them on my SD with 350/200's for a while, held 3k+ ICP. Blew an O ring connecting the remote IPR block. Replaced O-ring and havent run since. They were working fine prior to that. $1100 Shipped no cores needed.
2 Bad 7.3 PCM's APX-1 Dp441 and DAC3 DPC421 Make offer
1 Bad 7.3L IDM 110V Make offer
Tons of 6.0L Reman turbine housings. Fully cleaned, blasted, painted $60 each
6.0L Used VGT Solenoids. Some working some not. 20+ available. Make offer
Cummins P7100 13mm P Pump, all BOSCH internals, Quick rate cam, 850+cc $4500 with adjustable gear, no core charge.
T6 1.10 Turbine housings for 96x88 Borg Warner turbos. New modified I have over 15 available $550 each
7.3L ZF6 Main Shaft NEW OEM (PN: 131930409401) $250
Air Lift Towing air bags with brackets and air lines. Manual fill, no air compressor. Good Shape. Were on my 01 F350 dually, but would imagine they fit 99-03 F250/F350. $200
Superduty Windows, Supercab Small pop out windows and brackets on the sides $50 each, 2 available. Rear Sliding Window, has some wear but still works and sealed. $100
Dana 80 Mag Hytec Cover. Used in good shape with bolts $150
Stock 6.4 Exhaust system. No downpipe. Was on F450 CCLB $100 Pickup only
Pair of Sterling 10.5 Axle shafts from Mitchell Differential. Brand new. Upgraded but not sure on material. $250 for the pair.
Southbend ZF6 Dual Disc Sintered Iron Clutch. Few hooks on it since rebuild by Kennys Pulling Parts. $1000
7.3L ZF6 Kennys Pulling parts, Dual Disc Organic Clutch. Needs rebuilt. Worked very well for towing until you add to much hp it burns it up. $350
2" Aluminum Wheel spacers. 8x170 M14 fine thread studs. No lug nuts $75 for the pair.
PHP Chip. Used on a customers truck for 2 weeks and then returned it. Chip, cable, switch in case. $250
ALL PRICES ARE OBO plus shipping. Make any offers, worst I can say is no. PM or call. 717-919-7423
I will mark items sold as we go.
2 like new 36x14.5x16" Trxus STS Tires mounted on 16x12 Mickey Thompson Classic III wheels. 8x170 bolt pattern for Ford D60 Front. Wheels are Like new. With center caps. $900 for the pair
Terminator Dual HPOP Setup. I had them on my SD with 350/200's for a while, held 3k+ ICP. Blew an O ring connecting the remote IPR block. Replaced O-ring and havent run since. They were working fine prior to that. $1100 Shipped no cores needed.
2 Bad 7.3 PCM's APX-1 Dp441 and DAC3 DPC421 Make offer
1 Bad 7.3L IDM 110V Make offer
Tons of 6.0L Reman turbine housings. Fully cleaned, blasted, painted $60 each
6.0L Used VGT Solenoids. Some working some not. 20+ available. Make offer
Cummins P7100 13mm P Pump, all BOSCH internals, Quick rate cam, 850+cc $4500 with adjustable gear, no core charge.
T6 1.10 Turbine housings for 96x88 Borg Warner turbos. New modified I have over 15 available $550 each
7.3L ZF6 Main Shaft NEW OEM (PN: 131930409401) $250
Air Lift Towing air bags with brackets and air lines. Manual fill, no air compressor. Good Shape. Were on my 01 F350 dually, but would imagine they fit 99-03 F250/F350. $200
Superduty Windows, Supercab Small pop out windows and brackets on the sides $50 each, 2 available. Rear Sliding Window, has some wear but still works and sealed. $100
Dana 80 Mag Hytec Cover. Used in good shape with bolts $150
Stock 6.4 Exhaust system. No downpipe. Was on F450 CCLB $100 Pickup only
Pair of Sterling 10.5 Axle shafts from Mitchell Differential. Brand new. Upgraded but not sure on material. $250 for the pair.
Southbend ZF6 Dual Disc Sintered Iron Clutch. Few hooks on it since rebuild by Kennys Pulling Parts. $1000
7.3L ZF6 Kennys Pulling parts, Dual Disc Organic Clutch. Needs rebuilt. Worked very well for towing until you add to much hp it burns it up. $350
2" Aluminum Wheel spacers. 8x170 M14 fine thread studs. No lug nuts $75 for the pair.
PHP Chip. Used on a customers truck for 2 weeks and then returned it. Chip, cable, switch in case. $250
ALL PRICES ARE OBO plus shipping. Make any offers, worst I can say is no. PM or call. 717-919-7423
I will mark items sold as we go.
Last edited:
