Compound video with II Pump and 60% Inj

Craig@MFI · Feb 1, 2012

I can still beat mike when I'm on xtreme street it's close but I pull on him on race it would be alot different but I don't like how my truck dd in race

Jeff@Spartan · Feb 1, 2012

Mike@MPD said:
Just hooked an analog bp gauge up and at 85psi bp was hovering around 87-90psi wot, got it one time to peg the boost gauge at 100psi and the bp pegged also lol, you ask jeremy about that one lol. Craig did a hell of a job making a dp and finishing the exhaust. Jeremy gave me his stack to put on and it looks awesome

Sent from my Droid Charge

And this is still on stock valve train??????

Mike@MPD said:
Sent from my Droid Charge

That looks really good Mike! I am seriously considering putting another stack back on my truck. I think I'll like it okay a second time around since I have a muffler on my exhaust now. LOL

Dzchey21 · Feb 1, 2012

Craig@MPD said:
I can still beat mike when I'm on xtreme street it's close but I pull on him on race it would be alot different but I don't like how my truck dd in race

Me.either street is much easier to.drive and less smoke

madman1234509 · Feb 1, 2012

I love his truck. Looks sick. I have my on and off days about tinting tail lights. Sometimes I think it takes away from the cleanliness of our trucks and is juvenile, other times it looks really good... This one pulls it off, esp with the reverse lights not being tinted. Now tint that cab light and get some leds to put in it!!

BTW who tinted your tails or did you do them yourself??

Mike@MPD · Feb 2, 2012

Its not loud at all with the stack, yes its on stock valvetrain, i did the tailights myself, the third brake light is tinted i left the outsides clear for lighting

madman1234509 · Feb 2, 2012

night shades and clear coat? maybe if I can pick up some headlights for cheap Ill give it a go. Truck looks perfect man!

O2ShootTheJ · Feb 2, 2012

don't nightshade your headlights...

UPINSMOKE · Feb 2, 2012

Mike@MPD said:
Its not loud at all with the stack, yes its on stock valvetrain, i did the tailights myself, the third brake light is tinted i left the outsides clear for lighting

It really isn't too bad at all volume wise. It can drone a tiny bit in low low rpms... Like 12-1400... But at highway I could hear conversation fine and was sitting directly in front of the stack.

Truck pulls very hard up to and over 100mph.

I was happy to see back pressure stay extremely close to 1:1 all the way to 100psi.

UPINSMOKE · Feb 2, 2012

nickg3130 said:
Looks good man the height of the stack is perfect.

It's a 7" stack that is 48" tall. A plate is welded right at the point the stack reduces to 5", and the plate is then bolted to the bed.

It is the cleanest way to do a stack IMO because it is 7" all the way down to the bed floor; and sits the tip of the stack at the EXACT same level as roof height. You also don't have the added clamps and such around the stack to clutter things up.

Mike@MPD · Feb 2, 2012

O2ShootTheJ said:
don't nightshade your headlights...

Agreed but if you do goo gone takes it right off. Btw i didn't use clear on mine

Sent from my Droid Charge

3brorce · Feb 2, 2012

Mike@MPD said:
Agreed but if you do goo gone takes it right off. Btw i didn't use clear on mine

Sent from my Droid Charge

Good to know about goo gone. It does not haze the plastic and has its factory shine after goo goneing? My tails are just too dark. How many coats did you use?

Mike@MPD · Feb 2, 2012

Nope tgey looked brand new. I think i did 3 light coats

Sent from my Droid Charge

madman1234509 · Feb 2, 2012

Blah no way not head lights. Auto correct on my phone changed taillights to headlights. I'll eventually prolly pick up spare head lights and paint the insides.

SSpeeDEMONSS · Feb 2, 2012

UPINSMOKE said:
It's a 7" stack that is 48" tall. A plate is welded right at the point the stack reduces to 5", and the plate is then bolted to the bed.

It is the cleanest way to do a stack IMO because it is 7" all the way down to the bed floor; and sits the tip of the stack at the EXACT same level as roof height. You also don't have the added clamps and such around the stack to clutter things up.

yup!