Died when driving no start no codes

Noladieseldog · Feb 7, 2017

No start no codes ? So I been trying to get the truck back on the road I had a bad IDM put a new one in started right up then had to change a injector after that ran great . I bought a ts chip put it in and started to have problems after driving it right of the bat shifts weird I thought it was the transmission but it would start acting up I'd pull over turn off and start it back up and it drives fine so I took out the ts chip on problems this was yesterday all the problems start so I took it out to get a can of skoal and it died and no restart no codes . The truck was sitting up for about a year

ghohouston · Feb 8, 2017

Do you have a scanner, or access to a good scanner?

Noladieseldog · Feb 8, 2017

Yes a auto zone scanner it worked for the injector and the idm . That's the first thing I hooked up and nothing comes up could the pcm be bad

Arisley · Feb 8, 2017

You need a better scanner.

gnxtc2 · Feb 8, 2017

SD or OBS? Does the WTS light come on?

Billy T.
[email protected]

taylorv0000 · Feb 8, 2017

Do you have a android or iphone?

Sent from my HTCONE using Tapatalk

Noladieseldog · Feb 8, 2017

Yes i have a iphone taylorv0000 and yes the wts light comes on

cpadolf3 · Feb 8, 2017

Noladieseldog said:
Yes i have a iphone taylorv0000 and yes the wts light comes on

Did you disconnect your batteries before removing the TS chip?

Sent from my SM-G935V using Tapatalk

Magnum PD · Feb 8, 2017

Check your IPR

rusty1161 · Feb 8, 2017

And check your IPR pigtail. Both of my wires were missing the insulation, shorting out and gave me my no start.

Rusty

Arisley · Feb 9, 2017

cpadolf3 said:
Did you disconnect your batteries before removing the TS chip?

Sent from my SM-G935V using Tapatalk

No reason to disconnect batteries. Just make sure the keys are in your pocket.

cpadolf3 · Feb 9, 2017

Arisley said:
No reason to disconnect batteries. Just make sure the keys are in your pocket.

I've heard of people frying their PCM by removing the chip without disconnecting the batteries

Sent from my SM-G935V using Tapatalk

Arisley · Feb 9, 2017

Nope. You can fry it without pulling the key out of the ignition though. I have pulled my chip a hundred times, never disconnected the batteries.

Noladieseldog · Feb 9, 2017

Yes i disconnected the batteries taking out the pcm . I'll check the wires today .I put a new crank position sensor in 2 week's ago before changing the idm and now just saw the tach is not moving. Wouldn't it come up as a code on the scanner. I'm thinking the old one is still good I'm swapping it out today . Hopefully that's one of the problems.

Noladieseldog · Feb 9, 2017

Thank you all for your help btw

Arisley · Feb 9, 2017

Sometimes the CPS will give a code, sometimes it won't.

johngaddis · Feb 9, 2017

Vacuum leak?

Sent from my 0PJA2 using Tapatalk

Noladieseldog · Feb 9, 2017

Okay put a old cam sensor tach moved it started ran and quit I went to napa and got a new one and put that one in it started and quickly stalled tach move both times and now nothing are they bad or could I have a bad plug wires are okay looking tach is not moving any more