Reply to thread

Message: [QUOTE="Zmann, post: 1467022, member: 2025"] I compared these to my 06 strikers and the front leg (where the latch hooks on to ) is in the exact same position so the door does not close any further but the rubber snubber does wedge into the latch area and also puts some outward pressure on the door the wedge keeps the latch from bearing all its weight on the striker be aware the footprint of the 150 strikers is a little different so you may show same scratches or just tape off the area and paint it black before you pu the striker on another thing i had read and believe to be true is that if you remove the tabs for the captured nut plate on the door jamb you may be able to adjust the striker a little in all directions vs the no adjustment OEM gives you [/QUOTE]

Verification

Random media

EDGE Insight CTS - Cheap Insurance

image_9_

10200613685891940

IMG_20150419_200803_714

95_Bronco_conversion_pics_005

Radiator

clean1

Stacks

P1060064

P2220001

Six.4

Latest posts

Do not recommend Choate Engineering
- Latest: DEEZUZ
- Yesterday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 9:41 PM
7.3 Aftermarket
Truck slipping into 4th
- Latest: Powerstroke Cowboy
- Yesterday at 9:26 PM
6.7 Tech
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Yesterday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

DEEZUZ

Total: 814 (members: 1, guests: 813)

Top