Ok so Im wrapping up my build this weekend. Installing RCDs dual fueler kit on my 6.4. Ran into a problem that my belt is waaaayy too long they supplied. Anyone have this kit and can give me their belt number? The one they gave me was a K081055HD. I measured this belt to be roughly 4 inches too long. Which puts me at needing a K081015HD or a K081005HD. Would make sense with either of those being only one part number off. Just my luck to receive the wrong one though! Anyone that can help?
Dual Fuelers
- Thread starter Sixfoh
- Start date
Belt Routing
Ok, so as it turns out RCD did send me the right belt! Shame on me for routing it incorrectly.. Now I have a question to ask the members on here some of their opinions. Whether you know 6.4s or not chime in. Im going to post two different pictures with this of two different belt routing options. Share which one youd prefer and why.
Ok, so as it turns out RCD did send me the right belt! Shame on me for routing it incorrectly.. Now I have a question to ask the members on here some of their opinions. Whether you know 6.4s or not chime in. Im going to post two different pictures with this of two different belt routing options. Share which one youd prefer and why.
Attachments
sootie
Well-known member
- Joined
- Oct 3, 2012
- Messages
- 11,849
- Reaction score
- 36
id prefer not to run an RCD dual fueler.
White_monster
Active member
The second routing. Belts jump around when turning. No need for extra wear for no reason.
Why is that sootie?
ncollins64
Well-known member
It is using a cp3 vs a k16 like 6.4s come with. Can be harder to tune as well.
I hope its not too hard to tune. RCD claims the K16 in the stock location will be able to handle regulating the pressure of both pumps. The cp3 has no electrical connection happening in their kit. Leaving it to run at "full tilt". We shall see this weekend how it all pans out. Hoping it all comes together well.
sootie
Well-known member
- Joined
- Oct 3, 2012
- Messages
- 11,849
- Reaction score
- 36
Yep they have said that forever. Unfortunately it is not the case. I hope you enjoy the horrendous injector rattle, non-linear and jumpy throttle and have fun with the tuning!
sideactiondiesel
Member
I 2ND this message lol.
RCD# the next sinister
**** may be in a pickle then. I love injector rattle as much as your sarcastic comments on my post as well as others. Also thanks for answering the belt routing question
webb06
Active member
The second pic is more of the stock routing on all of the other pulleys. I’d go with that
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
