Dual IPR block. Need help

[justinlogue5_0]

Cool, thanks.

 

[Magnum PD]

Got hoses fabbed up, not what is needed but see how the version works

 

[Magnum PD]

Had some time today, put hoses all on, soldered the IPR wires up, cranked a little bit, and fired up! :redspotdance:

That’s the finished product.

This is where I put the return

Took it up to the block like this

The hose is close to the idler but clears it.

 

[gwunter]

Nice!! Any leaks thus far on the orb ports?

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[ja_cain]

Awesome! Is that hose by the idler, the return? If so, what is the id of the hose?

Sent from my Pixel 2 XL using Tapatalk

 

[Magnum PD]

I kept the ICP where it’s at.

First impressions are, finally no more 3.1% duty cycle. I don’t have the common occurrence of when you let off the pedal and there’s a weird “burp” or “check” that I use to have. Still have a hiccup when accelerating sometimes. Hope that will go away sometime.

One thing to debate is, could the edge filter have been a restriction? Now that it’s not there anymore, could there be a problem? The edge filter kinda acted like a filter to let you know if debris was in the system.

On a personal note, big thanks to Shannon for fabricating the block for me.

Justin Cain, for helping me through and being a (one of many) friend to me. As y’all know I was in the middle on this thread when the worst day of my life happened. Seeing my sister die in front of me is something that tore me apart right down to my soul. God is putting me back together to be a better man.

 

[Magnum PD]

Might be too soon for leaks. I’ll check when I get home.

 

[dsberman94]

Sweet set up. Glad to hear you made it through your hardships as well.

 

[Magnum PD]

https://youtu.be/Xfk0yx2X1c4

 

[psduser1]

Glad to see you back on this project after your sister's death. Sounds like life is settling down a bit, at least somewhat.

 

[Magnum PD]

Mom is still doing poor, Jake is still adjusting.

 

[Magnum PD]

Took it on the interstate. Before, the high rpms would throw the CEL from producing too much HPO.

I still need to figure out what is causing the bucking at high rpms when accelerating. It’s not the IPR now. Maybe the Cam sensor?

 

[lincolnlocker]

Took it on the interstate. Before, the high rpms would throw the CEL from producing too much HPO.

I still need to figure out what is causing the bucking at high rpms when accelerating. It’s not the IPR now. Maybe the Cam sensor?

Is the cam gear welded to the cam shaft?

live life full throttle

 

[Magnum PD]

Yes

 

[Hotrodtractor]

Glad to see you got it running.

 

[njjeep]

Any updates?


Sent from my iPhone using Tapatalk

 

[Magnum PD]

After I took the pigtail out of the sensor and put it back in, haven’t had any skips. Might have been moisture?

 

[ja_cain]

After I took the pigtail out of the sensor and put it back in, haven’t had any skips. Might have been moisture?

That's awesome!

Sent from my Pixel 2 XL using Tapatalk

 

[Arisley]

Try wrapping it in heat shrink.

 

[Magnum PD]

I’ll clean it up. Don’t use Dielectric grease on the connector?