LOL yea but atleast you're gonna do it now while the cab is up.
True, haha. Stopped down at Unlimited Diesel today, dropped off the RCD pan which is now powder coated Silver Wrinkle. Motor assembly begins today and will go through the week including suspension work as well. Hoping to have everything back in the truck with all the new parts installed and on by next week, tuning will happen next week as well. Made a final decision to change Up-Pipes and get another set of RCD's Up-Pipes with EGR Provision. Sean @ SDP will be providing a waste gate kit for this, using a TIAL wastegate. So now the parts list goes as follows
New Reman 6.4 shortblock, machined and surfaced
HD Pistons, flycut, delipped and coated. Big Thanks to Morgan @ Midwest
Stage 1x Cam from Tadd @ Elite
SADP Lifters also courtesy of Tadd @ Elite
New OEM Rockers
New OEM heads, surfaced, hardened valve seats
Extreme H13 Studs
RCD High Rev Valve Springs & HD Pushrods
Elite Tow Power Plus Compounds (72 Atmo/59mm VGT HP)
Elite Billet Flexplate
BD 6.0 Exhaust Manifolds
RCD Up-Pipes w/EGR
RCD Ported Intake Manifold
MPD CCV Reroute
New OEM Waterpump
Sinister Coolant Filter Kit
No Limit Polished Hot Pipe
New front body mounts
Alradco Radiator & Intercooler
Revised OEM upper & Lower Radiator Hoses
Dynatrac Balljoints
ICON 2.5" Front Coil Springs
ICON adjustable track bar w/upgraded rod end
OUO Adj ALA's 3-Link
OUO 5" Traction Blocks w/Long Gusset Bars
Hellwig Front & Rear Swaybars
SDP Downpipe
SDP Waste Gate Kit w/Tial Waste Gate
5" Flo Pro Exhaust
ATI Harmonic Balancer/Damper
ARP Flexplate bolts & Crank Bolts
Diesel Site Intercooler Piping Boots
RCD Aluminum Oil Pan
Mag Hytec 5R110 Transmission Pan
K&P Engineering Oil Filter
There will be a brand New Edge CTS to monitor everything now as well. No limit Cold Side Pipe, Air Intake and Intake elbow being reused. Injectors flow tested & Balanced by River City. They will be re-used. Updated Degas Bottle. Elite ported fuel Rails being re-used as well. Tuning will be Gearhead. This SHOULD be the finalized list LOL