ECU Code

Trav-O

New member
Joined
May 18, 2011
Messages
978
Reaction score
0
Location
TN/KY Line
I have a customer looking for a Chip for his '96 E350 Van. My Distributor said the 3 digit code is needed to order. They said its in the kick panel. I checked both, and nothing there.

Anyone know?
 

Arisley

Moderator
Joined
May 18, 2011
Messages
9,383
Reaction score
29
Location
Arlington, Texas
Moved this to the OBS section, might get better help here.

Not sure where the PCM is on a van. But the code is on the back of the PCM itself.

What chip are you looking for? One of the chip burners here could probably hook you up.
 

Bugman

Active member
Joined
Aug 20, 2011
Messages
1,293
Reaction score
6
Location
Gypsum, Co
The PCM for a van is beside the Brake Booster at about 9 o'clock looking at the booster from the Front of the Van. You may need to remove the Airbox, and push the Hose to the left and disconnect the Oil fill tube from the firewall lip....remove the connector first .....you need a 10mm Deep socket ......for the nuts I used 2 extensions ( about 12 inches total and I prefer 1/4 inch drive)
Then you undo the nuts also 10 mm on each side ..... and the unit slides out like a drawer....careful not to lose the nuts as they are a real Fine thread and hard to find. The PCM code should be on a sticker on it.
 

Justin@DP-Tuner

New member
Joined
Jun 22, 2011
Messages
2,170
Reaction score
0
Lay on the drivers side floor board and look up. Right above the throttle pedal.

VanPCMcode_zps64a7563e.jpg
 
Joined
Aug 12, 2011
Messages
454
Reaction score
12
Location
Parker, TX
That is it! You should be able to get a chip for that. The PCM "type" is a DPC-202 and the program code is a NAW4. Pretty common. Cheers!
 
Top