EGR Del, what all comes off with it?

[SlowSmoke]

Flo Pro kit is the one we designed, It takes about 4-5 hours to install. It's one of the cleanest kits out there. We remove the coolers as well as the brackets. You don't need to take out the brackets but it looks a lot better if you do. If you leave the coolers in place and just block off the exhaust flow, there is still a chance of coolant leaking into your coolers.

 

[clayton]

Here's another pic for fun..

 

[Tx_Powerstroke]

did my ptp this weekend, took right about 3.5 hours, didnt remove the plastic Y, only the ic pipe, steering shaft bolt, and loosened the dip stick tube, left it in and didnt have to cut the egr pipe, plus all was with hand tools minus the steering shaft

 

[Cajunhunter67]

I didnt drain the Radiator. Just removed the coolers and degas bottle. Took just 2 1/2 gallons to fill er back up. I had an cordless ratchet which made this job much easier. But the lower cooler was still a pain.

 

[BFT]

I didnt drain the Radiator. Just removed the coolers and degas bottle. Took just 2 1/2 gallons to fill er back up. I had an cordless ratchet which made this job much easier. But the lower cooler was still a pain.

Did it make a mess with the coolant?

 

[Cajunhunter67]

Did it make a mess with the coolant?

Not bad at all. But I did do it outside my shop. Even if you drain the radiator, its still going to drop quiet a bit of coolant when you remove the coolers and metal coolant lines.