WHY NOT
New member
I just got my EGT probe installed today pre-turbo with this kit http://www.kemracing.com/kem-6-7l-ford-egt-kit/
and the readings seem way off to me. At idle my truck will be at about 240* when I was driving around it would drop to about 210* at 65mph. Then under throttle it drops even more to about 180*. I tried a boosted 4x4 launch and could only get about 220* then when I left off the break it dropped to 175*ish with the throttle mashed though about 80mph. When I let up the egts went up to 320*ish. Truck went into regen as well and 65mph was about 550*.
I have the yellow wire to the yellow side on pyro 1 and the red wire to the red side on pyro one.
Any ideas on what I did wrong? Do you think switching the wires around would help?
and the readings seem way off to me. At idle my truck will be at about 240* when I was driving around it would drop to about 210* at 65mph. Then under throttle it drops even more to about 180*. I tried a boosted 4x4 launch and could only get about 220* then when I left off the break it dropped to 175*ish with the throttle mashed though about 80mph. When I let up the egts went up to 320*ish. Truck went into regen as well and 65mph was about 550*.
I have the yellow wire to the yellow side on pyro 1 and the red wire to the red side on pyro one.
Any ideas on what I did wrong? Do you think switching the wires around would help?