Reply to thread

Message: [QUOTE="makuloco2000, post: 799871, member: 12570"] Pull both negative battery terminals before opening up FICM plate for inspection! Here is the TSB, you have to check it to see if it can be half shell repaired, yes most early 2003 cannot be repaired. Remove the two (2) Torx T20 retaining screws and inspection plate from the back of the FICM. (Figure 2) [ATTACH=full]117974[/ATTACH] Figure 2 - Article 10-12-6 Inspect the buss connector screws. If FICM is an early style with seven (7) connector screws, do not disassemble. Replace the FICM assembly. (Figure 3) [ATTACH=full]117975[/ATTACH] Figure 3 - Article 10-12-6 If FICM has four (4) connector screws, proceed to Step 4 for inspection and repair. (Figure 4) [ATTACH=full]117976[/ATTACH] Figure 4 - Article 10-12-6 [/QUOTE]

Verification

Random media

17_Intake_Product_Photo

2012-03-01_22_17_071

step_15

1911

3-7_096

Corsilli's new badges

AA7FB336-D322-4DD9-8017-CB9D2134FC8B

2011-07-19_18-00-01_887

Latest posts

2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Yesterday at 8:30 PM
7.3 Aftermarket
I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Friday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech

Members online

No members online now.

Total: 713 (members: 0, guests: 713)

Top