ISO 7.3 turbo parts

[stock73]

Psdpullerjr I sent you my number


Sent from my iPhone using Tapatalk

 

[PsdPullerJr]

Ya did?

 

[NRHX2009]

Any details? Pm is fine if you don't want to post. Interested in this tho

4+4 wheel. Blade exit angle is less vertical than a ww2, thus holding a higher pressure, lightest wheel out there, 4-7psi gains, 17hp and 32 ft/lb gains on a superduty with ts chip, intake, and exhaust.

Only myself and one other company sell this wheel. Not gods gift to a 7.3L but it does work great and has a nice, not annoying tone to it.


http://barderturboservice.com/products/73l-tpgtp38-billet-44-compressor-wheel

 

[lincolnlocker]

4+4 wheel. Blade exit angle is less vertical than a ww2, thus holding a higher pressure, lightest wheel out there, 4-7psi gains, 17hp and 32 ft/lb gains on a superduty with ts chip, intake, and exhaust.

Only myself and one other company sell this wheel. Not gods gift to a 7.3L but it does work great and has a nice, not annoying tone to it.


http://barderturboservice.com/products/73l-tpgtp38-billet-44-compressor-wheel

nice!! miggt have to get this for my 01..

live life full throttle

 

[stock73]

Well it's back together with a stock unit...


Sent from my iPhone using Tapatalk

 

[jwlandry]

Glad it worked for you.

 

[stock73]

Thank you, I put it on last night


Sent from my iPhone using Tapatalk

 

[stock73]

Looking for a good mashine shop around Houston to cut a backing plate and housing for a 66


Keep calm and Stand on it !! Sent from my iPhone using Tapatalk

 

[NRHX2009]

You will want a 1.00 or 1.15 turbine housing to go along with a 66mm compressor. I have a complete 66mm conversion kit available if interested.

 

[stock73]

Pm sent


Keep calm and Stand on it !! Sent from my iPhone using Tapatalk