powerlifter405
Active member
I just pulled the JL and Eclipse out of the 99 PSD I acquired recently. I had the Alpine PDX-M6 pushing 2 10's in another vehicle. The Eclipse and the Alpine were working perfect when they were removed.
$300 for the JL Audio 500/1v2
$150 for the Eclipse PA5422 4ch.
$300 for the Alpine PDX-M6
I'll work a deal for all 3.
The eclipse pushed the current speakers just fine, actually pretty solid IMHO. I thought it sounded pretty decent but it's a honkin beast. I'm redoing things and will go w/ a single 5ch later on down the line. I will also have the Pioneer Double Din up for sale soon.
Info on the Eclipse:
http://static.fixya.com/Manuals/E/Eclipse/_F342821429F299C2E12E618FCA97A9C4.pdf
SPECS:
*200W × 4 Channel Max. power Output at 2
*120W × 4 Channel 0.1% THD at 2 Stereo, 20–20,[email protected]
(RMS Continuous Power)
*85W × 4 Channel 0.1% THD at 4 Stereo, 20–20,[email protected]
(RMS Continuous Power)
*Signal to Noise: 105db
*ChannelFlex Crossover
High-Pass Crossover (12dB/octave, 120Hz)
Adjustable Low-Pass Crossover (12dB/octave, 50–200Hz)
Adjustable Pre-Out High-Pass Crossover (12dB/octave, 50–200Hz)
*Subsonic Filter (0–50Hz)
*Free-Flow signal Circuit
*Double-Sided PCB
*High-Current, High-Speed Output Devices
*High-Efficiency, High-Energy MOSFET power Supply
*Audiophile Grade Component Selection
*Intelligent 7-Way Discrete Protection Circuitry
*Music Reproduction with Low Distortion & Ultra-Low Negative Feedback
*Efficient Cooling with Low-Profile Heatsink
*Multi-Mode Configuration
*Stereo/Mono Switch
*2 ohm Stable Design
Designed, engineered and made in the U.S.A by Fujitsu Ten. From what I could find out this model made by FT is under rated and is "old school".
Info on the JL.
http://www.jlaudio.com/500-1v2-car-audio-slash-v2-amplifiers-98080
http://mediacdn.jlaudio.com/media/mfg/9013/media_document/live_1/500_1_MAN.pdf?1317780724
http://www.alpine-usa.com/product/view/pdx-m6/
$300 for the JL Audio 500/1v2
$150 for the Eclipse PA5422 4ch.
$300 for the Alpine PDX-M6
I'll work a deal for all 3.
The eclipse pushed the current speakers just fine, actually pretty solid IMHO. I thought it sounded pretty decent but it's a honkin beast. I'm redoing things and will go w/ a single 5ch later on down the line. I will also have the Pioneer Double Din up for sale soon.
Info on the Eclipse:
http://static.fixya.com/Manuals/E/Eclipse/_F342821429F299C2E12E618FCA97A9C4.pdf
SPECS:
*200W × 4 Channel Max. power Output at 2
*120W × 4 Channel 0.1% THD at 2 Stereo, 20–20,[email protected]
(RMS Continuous Power)
*85W × 4 Channel 0.1% THD at 4 Stereo, 20–20,[email protected]
(RMS Continuous Power)
*Signal to Noise: 105db
*ChannelFlex Crossover
High-Pass Crossover (12dB/octave, 120Hz)
Adjustable Low-Pass Crossover (12dB/octave, 50–200Hz)
Adjustable Pre-Out High-Pass Crossover (12dB/octave, 50–200Hz)
*Subsonic Filter (0–50Hz)
*Free-Flow signal Circuit
*Double-Sided PCB
*High-Current, High-Speed Output Devices
*High-Efficiency, High-Energy MOSFET power Supply
*Audiophile Grade Component Selection
*Intelligent 7-Way Discrete Protection Circuitry
*Music Reproduction with Low Distortion & Ultra-Low Negative Feedback
*Efficient Cooling with Low-Profile Heatsink
*Multi-Mode Configuration
*Stereo/Mono Switch
*2 ohm Stable Design
Designed, engineered and made in the U.S.A by Fujitsu Ten. From what I could find out this model made by FT is under rated and is "old school".
Info on the JL.
http://www.jlaudio.com/500-1v2-car-audio-slash-v2-amplifiers-98080
http://mediacdn.jlaudio.com/media/mfg/9013/media_document/live_1/500_1_MAN.pdf?1317780724
http://www.alpine-usa.com/product/view/pdx-m6/
Attachments
Last edited:
