Lowered Trucks

[12FlowerStroke]

I will be pulling the leveling kit off my truck and running no rear block and maybe softer front springs. My question is what size ubolts are needed for no block and what springs do I need to get for it to sit level? Going to be running 305/50/R20 12 wides -44. If anybody has pictures pleases post them. Thanks

 

[bigrpowr]

I will be pulling the leveling kit off my truck and running no rear block and maybe softer front springs. My question is what size ubolts are needed for no block and what springs do I need to get for it to sit level? Going to be running 305/50/R20 12 wides -44. If anybody has pictures pleases post them. Thanks

sounds like you'll be running my exact setup .

 

[Mikeyfitz]

Those speciality forged look ****ing awesome man

 

[12FlowerStroke]

sounds like you'll be running my exact setup .

Are you running 4400 or 4800 and did you need to do any trimming?

 

[O4ep3civ]

Mike do you have anymore pictures?


Sent from my iPhone using Tapatalk

 

[bigrpowr]

Are you running 4400 or 4800 and did you need to do any trimming?

yeah some trimming to rear of the fender liner and the bumper support.

Mike do you have anymore pictures?


Sent from my iPhone using Tapatalk

probably what would you like to see ?

 

[powerstrokecrzy]

I'd like to see some level side shots and pics of clearance underneath pics.

How did you lower the front? Softer springs or what? What size tire you running?

 

[Platinum15]

Very interested also. Wanting to lower my platinum 2/4 or 3/5

 

[MorganM]

This is lowered 3" front and about 4.5" rear. I've since raised the front .5" and am using a stiffer spring to avoid frame/axle interference. The rear is a DJM shackle and removed spacer.

Tires are 305/55/20

 

[Platinum15]

Where did you get the front springs?

 

[MorganM]

Scott at Deaver sent me both pairs. Coil Spring Specialties made them. You can save $ contacting CSS yourself but Deaver is WAY easier to work with...

 

[Platinum15]

Awesome information. Do you remember what the cost of the springs where?

 

[MorganM]

Less than $350, but that was nearly 3 years ago. He helped me get shorter front and rear Bilsteins too. In hindsight, I wouldn't go lower than 2 or 2.25". I'd increase the spring rate maybe 8% instead of 15% and I'd go with Fox shocks.

 

[Platinum15]

Sweet, I was wanting to do about a 2/4 because Im running 24" alcoa on 295/40/24's. Fox is what I was leaning towards but didnt know how to go about getting custom one built.