Reply to thread

Message: [QUOTE="Newstroker, post: 310729, member: 6026"] First off, I want to say hi since this is my first post and say I could not be happier to be in a 6.4! I have a 2009 ford F350 with a few mods: spartan tuner dpf delete egr delete - no wastegate h11 studs upgraded valve springs upgraded pushrods CAC pipe Aftermarket downpipe 71mm towpower turbo 15% over tips cai ad165 On the 275 tune i am seeing around 83-84psi on the dd at wot on a long pull. When I roll into the throttle it will hit approx 76-78psi and continue to build. All psi readings are on the DD so it is 14.7 higher than gauge. So I am wondering at what pressure should I install a gate? My boost pressure is approximately 58psi...I was mainly watching ebp. I will be drag racing and sled pulling on the weekends with this truck, and it is my daily driver. Thank you, Paul [/QUOTE]

Verification

Random media

Venturi

Recon box

one_mo

Magneto_side_v2_in_shop

pipes

thumb_IMG_1330_1024

pistons

photo_1_1

What_UNBROKEN_thinks_if_it

2012-07-22_16-58-12_561

New (farkin') EGR valve

Latest posts

Truck slipping into 4th
- Latest: ju015dd
- Yesterday at 10:39 PM
6.7 Tech
DEF in the fuel tank of 2013 F250 6.7
- Latest: Crazy Canuck
- Monday at 12:05 PM
6.7 Tech
I
Tuning the 7.3 in current times
- Latest: INFRNL
- Monday at 9:28 AM
7.3 Aftermarket
2000 f350 dually lariat
- Latest: ju015dd
- Monday at 8:19 AM
7.3 Aftermarket
Best turbo upgrade in current times?
- Latest: 6.0 Tech
- Sunday at 11:01 PM
7.3 Aftermarket

Members online

No members online now.

Total: 1,076 (members: 0, guests: 1,076)

Top