powerstroker66
New member
Decided to go a different route and need to sell my set up. Fully assembled short block never ran. Also includes a set of heads ready to go on as well.
BLOCK:
-bored .020" over
-line bored
-All new bearings
-Factory speced HD Mahle pistons machined for .004" ring end gap or "gap less 2nd ring"
-external balanced
-Colt stage 2 cam
-new OEM ford lifters
-new meling oil pump
-both timing covers on and oil pan
-engine is painted old ford blue
HEADS:
-resurfaced
-triple cut valve job
-hardend valve seats
-all new springs and keeper
-machined and hand fit O ringed
Basically the engine was built to fix any 6.4 issues and make it smoother running. Built to hold right around 800hp or what ever stock rods will hold. UCF machine in Carlise, PA did all the work. Comes with a 1 year unlimited mile warranty. I just paid $8,250 to have it all done. I'm just looking to get out what i have into it. I'm asking $8,500 for everything. The $250 goes towards the core block and heads. Remember this is a NO CORE sale!! I will sell just the short block for $6,500 if need be as well. I do have the harness, intake manifold, and most of the part to assembly the engine however the turbos,HPFP, injectors, push rods, rocker arms assemblies are NOT included. (I either sold them or they were bad).
Please contact me directly for pictures.
215-622-1406
[email protected]
BLOCK:
-bored .020" over
-line bored
-All new bearings
-Factory speced HD Mahle pistons machined for .004" ring end gap or "gap less 2nd ring"
-external balanced
-Colt stage 2 cam
-new OEM ford lifters
-new meling oil pump
-both timing covers on and oil pan
-engine is painted old ford blue
HEADS:
-resurfaced
-triple cut valve job
-hardend valve seats
-all new springs and keeper
-machined and hand fit O ringed
Basically the engine was built to fix any 6.4 issues and make it smoother running. Built to hold right around 800hp or what ever stock rods will hold. UCF machine in Carlise, PA did all the work. Comes with a 1 year unlimited mile warranty. I just paid $8,250 to have it all done. I'm just looking to get out what i have into it. I'm asking $8,500 for everything. The $250 goes towards the core block and heads. Remember this is a NO CORE sale!! I will sell just the short block for $6,500 if need be as well. I do have the harness, intake manifold, and most of the part to assembly the engine however the turbos,HPFP, injectors, push rods, rocker arms assemblies are NOT included. (I either sold them or they were bad).
Please contact me directly for pictures.
215-622-1406
[email protected]