Mounting bracket for central hydraulics

[wjamesm]

First a little backstory . i have a 1994 F-Superduty non turbo IDI with the Quigly 4x4 conversion and 8' dump bed . It utilizes a belt driven central hydraulic pump on the passenger side of the engine that has a additional pulley on the front of the crank balancer to drive the pump with a separate belt . I just brought home a nice 95 PSD F-Superduty XLT yesterday . The trucks are identical 5spd's 60'' cab to axle trucks . So the plan is to swap over the dump bed and 4x4 conversion to the 95 truck . The only thing that i have to figure out is how to mount and drive the hydraulic pump . The 95 does have AC so i am looking for pics or help to figure out how to mount the pump up .

 

[Bugman]

I hate to say it but you just might have to figure it out yourself.

Get some angle iron and start looking on how you can do it.

 

[bens]

Maybe have to go to a pto style setup?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[wjamesm]

I was thinking of moving the alternator down to the 2nd alternator location and putting the central hydraulic pump in the upper alternator location . This how i figured how it would be done by a upfitter . DieselBrad has a psd f-superduty i think he has central hydraulics on it . hopefully he'll chime in on the with some pics .