My setup kc stage 2

kwelch08 · Oct 12, 2015

Don't be sorry bud I don't mind it my mods are
Kc stage 2
Sinister intercooler pipes and elbow
S&b intake
195/30 injectors
5 in exhaust
TSD tune
Ford blue spring
Banjo bolts
Stock intercooler
Egr d e l ete
Head studs
And prolly a few things I forgot about lol.
Leveling kit with 285/70/17

Sent from my SAMSUNG-SM-G900A using Tapatalk

KCTurbos · Oct 12, 2015

How did you test for boost/ehaust leaks? I can tell you that I have never tested a truck without at least fining a few little leaks (even though everyone always says they have no leaks)

I am not very familiar with elite injectors so that could be part of the problem.

What elevation are you at?
Who rebuilt the motor? Pull the oil fill cap to make sure you have good compression... I have seen a few botched rebuilds.

strokin6L · Oct 12, 2015

Some 33's on stock height with a leveling kit would help alot.

strokin6L · Oct 12, 2015

I have a boost leak tester if you want to borrow it Cody.

03cody · Oct 12, 2015

KCTurbos said:
How did you test for boost/ehaust leaks? I can tell you that I have never tested a truck without at least fining a few little leaks (even though everyone always says they have no leaks)

I am not very familiar with elite injectors so that could be part of the problem.

What elevation are you at?
Who rebuilt the motor? Pull the oil fill cap to make sure you have good compression... I have seen a few botched rebuilds.

I didn't test it but it has new riff raff boots, builds boost insanely quick, and holds at 32-35 psi.

The injectors were flow tested by holders before I put them in and tested out really well.....it actually surpised me that they were all so close lol.

I'm basically at sea level here in central illinois and asheville rebuilt the engine. There is zero blow by.