Ouo traction bars

[Poglife]

So I bought me some ouo traction bars for my 04 and ended up selling it before I put them on I was wondering if the front frame bracket and the rear traction block I bought will fit the 15. Brain says yes but want to make sure before I start. Thanks guys

 

[Swampfox]

What is the part # on them? Mine are 45001 and 45002 on the mounts. Also the width of the leaf spring could be different, mine is a 2016 and they are 3" wide. My 2006 f350 work truck has 3" wide springs to so you might be ok.

 

[Layson]

I know they are pretty good about swapping parts out to make it work. Front mount should be the same the rear I am not sure. Give Jared a call and ask him. He should be able to help you out.

 

[Breaking Habits]

The only thing that would worry me is putting a 0* block into a truck that needs at least a 2.5* Taper.

Give me a shout and let me know what you've got going on

503-780-3818 - Jared

 

[Poglife]

How do I know if I need a taper I believe my rear blocks are just 3.75" or whatever the smallest one is .. figured front mount is the same thanks .

 

[Poglife]

Here's what I have Jared


Sent from my iPhone using Tapatalk

 

[HeavyAssault]

First pic we have a winner: 2.5 degree shows the block angle.

 

[Poglife]

So everything should work? Thanks guys

 

[Swampfox]

I have the same blocks on my 2016.

 

[HeavyAssault]

http://www.ouostore.com/OUO_Application_Guide-OUO_Application_Guide.html

 

[Poglife]

I have the same blocks on my 2016.

Did you buy longer u blots mine look to be and inch to short

 

[Swampfox]

Did you buy longer u blots mine look to be and inch to short

Yes I bought the u-bolts from Jared at OUO with the top plate. The ones I got were long enough to work with the carli add-a-pack as well.

 

[Poglife]

Yes I bought the u-bolts from Jared at OUO with the top plate. The ones I got were long enough to work with the carli add-a-pack as well.

Thanks man