Pic request; level 33s 20x12

MaxdLaw · Oct 8, 2015

Looks like after winter my trucks going down to a leveling kit, my 20x12s, 33 inch terra grapplers, and some fox 2.0 shocks. Does anyone have a similar set up size wise and or know someone with a picture. Thanks.

Sent from my iPhone using Tapatalk

04cr450 · Oct 8, 2015

Yup my truck.. avatar

MaxdLaw · Oct 8, 2015

Nice thank you

Sent from my iPhone using Tapatalk

Powerstroke214 · Oct 8, 2015

I got a few, some on 35s, some on 33s, will try to denote which is which.

T.h.'s old truck, Coxeydiesel is his sn, I think?
20x12 on 33s. Have a few more pics of it if you want.

20x12s on 35s, I think the old owner is on here, forget his name, but I think he works for, or gets his work done by Mikey's diesel in FL, got a couple more pics, if you want

Popped up on fb, believe its leveled and on 20x12s and 33s, it has leaf springs, axle is narrower. Have more pics if you want

I believe 20x12 and 33, from fb

20x12 and 35 I think

20x12 on 35s

Whether or not you can run a 35 on a 12 wide wheel on just a leveling kit is up for debate.

Tyler Hoover tried, and cut his fenders and bumper. Some say it's impossible without doing that.

Others say they've done it, and had to trim a little bit.

And someone mentioned to me that it should fit decently with 3 link kit, so you can adjust the axle. I don't have the money for 12 wides yet, so I don't know. If I have time, I'll look for more pics, I know I have a few more, but finding them is a pain.

Sent from my iPhone using Tapatalk

MaxdLaw · Oct 8, 2015

Powerstroke214 said:
I got a few, some on 35s, some on 33s, will try to denote which is which.

T.h.'s old truck, Coxeydiesel is his sn, I think?
20x12 on 33s. Have a few more pics of it if you want.

20x12s on 35s, I think the old owner is on here, forget his name, but I think he works for, or gets his work done by Mikey's diesel in FL, got a couple more pics, if you want

Popped up on fb, believe its leveled and on 20x12s and 33s, it has leaf springs, axle is narrower. Have more pics if you want

I believe 20x12 and 33, from fb

20x12 and 35 I think

20x12 on 35s

Whether or not you can run a 35 on a 12 wide wheel on just a leveling kit is up for debate.

Tyler Hoover tried, and cut his fenders and bumper. Some say it's impossible without doing that.

Others say they've done it, and had to trim a little bit.

And someone mentioned to me that it should fit decently with 3 link kit, so you can adjust the axle. I don't have the money for 12 wides yet, so I don't know. If I have time, I'll look for more pics, I know I have a few more, but finding them is a pain.

Sent from my iPhone using Tapatalk

Thanks dude. Ya ideally I'd like a similar set up as that second to last picture. And ya my fenders are already cut haha. I have 38s right now.

Sent from my iPhone using Tapatalk

diezelfreak · Oct 8, 2015

Those trucks look good makes me want to hurry an wear my tires out to get x12's and 33's.

MaxdLaw · Oct 8, 2015

Smokin Rollin Stroke said:
Those trucks look good makes me want to hurry an wear my tires out to get x12's and 33's.

12 wide is a good luck but as soon as I went from 9 to 12 wide With 13.5 grapplers I have to wash it like every other day haha.

Sent from my iPhone using Tapatalk

diezelfreak · Oct 8, 2015

Do you have anymore pics of the blue one. Sorry clog up your thread maxd.

MaxdLaw · Oct 8, 2015

Smokin Rollin Stroke said:
Do you have anymore pics of the blue one. Sorry clog up your thread maxd.

Nah don't worry bout that, that's what it's for. I love this look but I'd atleast like a leveling kit so there's no rub.

And he's on 420s

Sent from my iPhone using Tapatalk

diezelfreak · Oct 8, 2015

Mines a 04 so mine won't stick out as far. What a shame.

diezelfreak · Oct 8, 2015

This is mine with a level an the 2" block in the rear it squats a little. But I had to take the 3" out were the springs are settling.

MaxdLaw · Oct 8, 2015

Looks pretty good. My old 05 had a leveling kit and 33s and it was perfect. On my black truck I did 8 inch and 18s and 38s. I just recently changed it to 20s and 37s. I'm mainly dropping it for comfort and convinience.

Sent from my iPhone using Tapatalk

Powerstroke214 · Oct 8, 2015

Smokin Rollin Stroke said:
Do you have anymore pics of the blue one. Sorry clog up your thread maxd.

**edit they're 20x14 I think

…would be better if it was just the truck…but it'll have to do

I really want to do a similar look to this. 35s look best, imo, but the trimming would be a pain. I just wish it wasn't so damn expensive to experiment with. I really want to do 20x12 blades or rebels on 35s with a 4.5" lift, but college says otherwise.

Sent from my iPhone using Tapatalk

MNStroker316 · Oct 9, 2015

Powerstroke214 said:
I really want to do a similar look to this. 35s look best, imo, but the trimming would be a pain. I just wish it wasn't so damn expensive to experiment with. I really want to do 20x12 blades or rebels on 35s with a 4.5" lift, but college says otherwise.

Sent from my iPhone using Tapatalk

Right there with ya on that statement!! I'm in the same damn boat, wanna do 22x12s on 35s, we'll see when that day comes haha.
I was pretty close to ending up down there at lsu as a PE, ended up in grand forks at UND as an ME.

swinky · Oct 9, 2015

20x12 32" tire

Sent from my SM-N920P using Tapatalk

Powerstroke214 · Oct 9, 2015

MNStroker316 said:
Right there with ya on that statement!! I'm in the same damn boat, wanna do 22x12s on 35s, we'll see when that day comes haha.
I was pretty close to ending up down there at lsu as a PE, ended up in grand forks at UND as an ME.

There's only one 20x12 I like that's not an AF wheel, too lol

And no chit!? I'm in ME, barely lol. If I could use 3/4 of the time/effort I put into this hobby into school, I'd be set lol

Sent from my iPhone using Tapatalk

Powerstroke Man 6.4 · Oct 9, 2015

Powerstroke214 said:
I got a few, some on 35s, some on 33s, will try to denote which is which.

20x12s on 35s, I think the old owner is on here, forget his name, but I think he works for, or gets his work done by Mikey's diesel in FL, got a couple more pics, if you want

Sent from my iPhone using Tapatalk

I own this truck now, well used to when I purchased it from FL it was "race truck" status with 420's cut coils and traction bars.

I sold it a few months ago though, the truck is now in Hawaii.

Powerstroke Man 6.4 · Oct 9, 2015

Here how it sits now.

MNStroker316 · Oct 9, 2015

Powerstroke214 said:
There's only one 20x12 I like that's not an AF wheel, too lol

And no chit!? I'm in ME, barely lol. If I could use 3/4 of the time/effort I put into this hobby into school, I'd be set lol

Sent from my iPhone using Tapatalk

I guess as they say, you have to pay to play! Tho, forces will never be in my budget for a long time.

Haha I'm all too familiar with that! Spend more time reading about what to do next to my truck then doing homework !

03cody · Oct 9, 2015

My truck is an 03 so it has leafs all the way around but I just put these 20x12's and 35s on it. It has a 4.5" lift on it and I still had to do a little trimming on the bumper and on the inner fender liner but nothing too drastic.