pics of 20x10's? f250 blocks bolt up to an f350?

[04cr450]

Thinking about getting new wheels now and was thinking about 20x10's. Any pics of them? Also was wanting to lower the back of my 350, take the 350 block out and install an f250 block. Is this job just a bolt on swap in and out?

 

[whitetailreflex]

As far as blocks go, it's just a matter of pulling u bolts and blocks and installing the new ones. The ubolts you have will more less be too long for the shorter blocks

 

[RedRice589]

There's like 8 threads on 20x10's ..... What size tire and offset? you staying leveled or stock or what?

 

[04cr450]

yeah all i had to do was look and find the threads my fault.. honestly just was too lazy to read down a couple pages etc etc. 305/55 possibly, offset not sure, im leveled. just want to take the rear block out and put a f250 block on to make the truck leveled.(i have an f350)

 

[xp1ik05]

not exactly what your looking for but guess it can help for planning.....04 250 with leveling kit and 08+ 350 block on 20x12's with 305 55 20's, currently swapping out rear block to stock 250 while installing cal-trac's, ill update pics later on

 

[white07psd]

Greg, my truck, the white regular cab you rode in saturday night has 20x12s just for reference. Also 99-04 has 1" on each side narrower axles so if you're looking to keep the wheels inside the fenders, 10s are the way to go on your truck. Itll look killer on 20s

 

[04cr450]

^oh ok understand, not good with suspension or wheel stuff.. Think I might want the 10's then. I like the way the silver truck looks above. Do they rub? Its was good hanging out with you Chris!

 

[xp1ik05]

^oh ok understand, not good with suspension or wheel stuff.. Think I might want the 10's then. I like the way the silver truck looks above. Do they rub? Its was good hanging out with you Chris!

they did.....like he said that an 04 and older have the narrower axles, had to trim the valance on the front bumper and pull back the plastic in the back of the wheel well, looking at it you would hardly see where it was trimmed unless you were digging around

 

[04cr450]

i gotcha. i have 16x12's with drag radials on them but their only 31" tires(use them for the track), so rubbing is not an issue, never thought about it lol Anyways, looking like i am going with 18x10's with -24 backspacing and 325/60's. should work just fine

 

[K_Hood]

not exactly what your looking for but guess it can help for planning.....04 250 with leveling kit and 08+ 350 block on 20x12's with 305 55 20's, currently swapping out rear block to stock 250 while installing cal-trac's, ill update pics later on

Man your truck looks good bud!

 

[xp1ik05]

thank you sir