The silicone is a few bucks I think it is worth a shot.
Sent from my SM-N920V using Tapatalk
Resurgence of a F100
- Thread starter 6speedsd
- Start date
Sent from my SM-N920V using Tapatalk
6speedsd
New member
I looked up the high temp red...it's good to 650F. I'm going to give it a try. Would be a super simple way to seal it up if it'll work.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
lincolnlocker
Well-known member
sounds great man!
live life full throttle
god bless america and the farmer who feeds your fat ass
live life full throttle
god bless america and the farmer who feeds your fat ass
6speedsd
New member
Thanks Jake. Been waiting almost impatiently to hear this thing run. It'll sound much better once the leaks are fixed. I hate exhaust leaks, and that's all my ears focus on....that tell tale ticking sound of an exhaust leak.
But at the moment I can just sit there and listen to it run. Ordered a trans filter and fluid earlier, so I'll change that later this week. Really hope that's all it is. Worries me with it trying (and failing) to engage at a high rpm....makes me think it's low pressure. After seeing the condition of the engine that came in the truck, in the back of my mind I sort of had this fear that it wasn't going to shift or something.
Shocking to me...NO ONE locally stocks a filter for a C4. None of the parts stores....every one of them says it's a special order part, which I just don't get. I know it's an old trans, but there are thousands of them still on the road. They all stock one for a C6 though.
Sent from my iPad using Tapatalk
But at the moment I can just sit there and listen to it run. Ordered a trans filter and fluid earlier, so I'll change that later this week. Really hope that's all it is. Worries me with it trying (and failing) to engage at a high rpm....makes me think it's low pressure. After seeing the condition of the engine that came in the truck, in the back of my mind I sort of had this fear that it wasn't going to shift or something.
Shocking to me...NO ONE locally stocks a filter for a C4. None of the parts stores....every one of them says it's a special order part, which I just don't get. I know it's an old trans, but there are thousands of them still on the road. They all stock one for a C6 though.
Sent from my iPad using Tapatalk
Last edited:
03_PSD
Member
Sounds good! When should we expect the burnout video lol....
dsberman94
Well-known member
Hopefully that's all it is but a stock rebuild is fairly cheap if you find the right person to do it.
6speedsd
New member
6speedsd
New member
There's a guy local I've been seeing on CL offering mild performance builds for like $650 I think. Not sure if that's converter included or not.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
6speedsd
New member
Door panels reassembled and installed.
Looks like the heater core has a hole in it too. Floorboard is wet under it.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Looks like the heater core has a hole in it too. Floorboard is wet under it.
Sent from my SAMSUNG-SM-G900A using Tapatalk
6speedsd
New member
Eh, I can deal with little issues like that. I just bypassed it and will deal with it at a later date. Not like I need heat this time of year anyways.
Dug through my catchall drawer on the tool box and found a tube of Ultra Copper high temp Permatex. Thought I remember seeing it. Put a good bit around the collectors where it was leaking. It's ugly as hell (orange) and hard to get in there and make it look good, but for now I just want it sealed. Going to let it sit up a day or 2 before I crank the truck again.
Been fixing all of dude's stupid wiring under the dash. He has wires tied in random places, and just dangling under there open ended. Can't get lights to the cluster for some reason. Well, the blinker arrows work, but when the lights are turned on, the only thing I get is passengers side blinker arrow lit up. Cut the key on and the fasten belts light comes on briefly, and the bulbs looked good...even though I didn't pull every single one.
Have to replace the wiper switch. Sometimes it'll work, sometimes not. It's 40yr old...it's to be expected. Looks like the water temp and fuel gauge both work, which is a bonus. Blower motor works, but speed selector switch does not.
And as an added bonus, I found a 3" Jegs tach under the seat! Not the prettiest thing, but it lights up and sweeps when you cycle the key, and I need a tach, so freebies are always good.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Dug through my catchall drawer on the tool box and found a tube of Ultra Copper high temp Permatex. Thought I remember seeing it. Put a good bit around the collectors where it was leaking. It's ugly as hell (orange) and hard to get in there and make it look good, but for now I just want it sealed. Going to let it sit up a day or 2 before I crank the truck again.
Been fixing all of dude's stupid wiring under the dash. He has wires tied in random places, and just dangling under there open ended. Can't get lights to the cluster for some reason. Well, the blinker arrows work, but when the lights are turned on, the only thing I get is passengers side blinker arrow lit up. Cut the key on and the fasten belts light comes on briefly, and the bulbs looked good...even though I didn't pull every single one.
Have to replace the wiper switch. Sometimes it'll work, sometimes not. It's 40yr old...it's to be expected. Looks like the water temp and fuel gauge both work, which is a bonus. Blower motor works, but speed selector switch does not.
And as an added bonus, I found a 3" Jegs tach under the seat! Not the prettiest thing, but it lights up and sweeps when you cycle the key, and I need a tach, so freebies are always good.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Last edited:
6speedsd
New member
Digging through a box of junk he sent with the truck and found this...
The inside still looks new.
Good thing I finished the glove box install earlier. Now it has a place.
Pulled the vents and dash trim to give it a fresh coat of satin black.
Sent from my SAMSUNG-SM-G900A using Tapatalk
The inside still looks new.
Good thing I finished the glove box install earlier. Now it has a place.
Pulled the vents and dash trim to give it a fresh coat of satin black.
Sent from my SAMSUNG-SM-G900A using Tapatalk
gwunter
Active member
This is coming along nicely!!
6speedsd
New member
Yeah I've had a few days lately to devote to it. Rest of this week...not so much. Fluid and filter will be here maybe Wednesday, so Saturday I'll swap all that out and hope she shifts then. Interior only needs a little more. I need to re-upholster the seat in black, new vinyl for the floor, some heat mat, get a radio installed, and put the dash trim back together, sun visors, and maybe a horn kit for the Grant steering wheel that's on it. It's ugly with an open center as it is now.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
psduser1
Well-known member
If you never open the book, the pages stay clean, lol.
Nice addition!
Don't know if they are the same, but I have a '79 grill and gage cluster, along with a few other random odds and ends, if you run into problems.
Nice addition!
Don't know if they are the same, but I have a '79 grill and gage cluster, along with a few other random odds and ends, if you run into problems.
Last edited:
6speedsd
New member
Seems like they'd be the same, but I can't say for sure. I appreciate the offer. I'll keep it in mind.
Got the wiper switch and blower motor switch ordered tonight. As well as a set of kick panels (was running speaker wiring from the doors and it dawned on me they were missing).
At some point I need to track down a pair of seat belt covers...or whatever they are technically called. Covers the seat belt retractor up behind your head. Found some on eBay but they are proud of those things.
I've been tossing around the idea of going back to the original 77 front end too....split grill and round lights. I've always been partial to the later style like I have, but while browsing the innerwebs looking for parts, I'm starting to like the earlier front end.
Sent from my iPad using Tapatalk
Got the wiper switch and blower motor switch ordered tonight. As well as a set of kick panels (was running speaker wiring from the doors and it dawned on me they were missing).
At some point I need to track down a pair of seat belt covers...or whatever they are technically called. Covers the seat belt retractor up behind your head. Found some on eBay but they are proud of those things.
I've been tossing around the idea of going back to the original 77 front end too....split grill and round lights. I've always been partial to the later style like I have, but while browsing the innerwebs looking for parts, I'm starting to like the earlier front end.
Sent from my iPad using Tapatalk
6speedsd
New member
Just out of curiosity, what odds and ends would they be? Might be something I could use that I'm not thinking of.
Sent from my iPad using Tapatalk
6speedsd
New member
It'll eventually get out of the garage for good.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Sent from my SAMSUNG-SM-G900A using Tapatalk
lincolnlocker
Well-known member
looking awesome man!! getting lots of stuff done..
ever thought of changing the rear diff fluid?
btw, I hate exhaust leaks too! especially on a gasser!
live life full throttle
god bless america and the farmer who feeds your fat ass
ever thought of changing the rear diff fluid?
btw, I hate exhaust leaks too! especially on a gasser!
live life full throttle
god bless america and the farmer who feeds your fat ass
Members online
No members online now.